Sunway GSM 900 User Manual

Contents  
Contents  
Sony Ericsson K700i  
Assembling the phone, SIM card, battery, making a call. Internet and email settings, synchronizing,  
Phone overview, using the menus, entering letters,  
Time and date, alarm clock, calendar, tasks,  
Text messaging, picture messaging, email, My Friends,  
Sony Ericsson Web site, safe and efficient use,  
1
This is the Internet version of the user's guide. © Print only for private use.  
2 Export Regulations: Software, including  
technical data, is subject to U.S. export control  
laws, including the U.S. Export Administration  
Act and its associated regulations, and may be  
subject to export or import regulations in other  
countries. Customer agrees to comply strictly  
with all such regulations and acknowledges  
that it has the responsibility to obtain licenses  
to export, re-export, or import Software.  
Software may not be downloaded, or otherwise  
exported or re-exported (i) into, or to a national  
or resident of, Cuba, Iraq, Iran, North Korea,  
Libya, Sudan, Syria (as such listing may be  
revised from time to time) or any country to  
which the U.S. has embargoed goods; or (ii)  
to anyone on the U.S. Treasury Department’s  
list of Specially Designated Nations or the  
U.S. Commerce Department’s Table of Denial  
Orders.  
3 Restricted Rights: Use, duplication or disclosure  
by the United States government is subject  
to the restrictions as set forth in the Rights  
in Technical Data and Computer Software  
Clauses in DFARS 252.227-7013(c) (1) (ii)  
and FAR 52.227-19(c) (2) as applicable.  
Part of the software in this product is copyright  
© SyncML initiative Ltd. (1999-2002).  
All rights reserved.  
Other product and company names mentioned  
herein may be the trademarks of their respective  
owners.  
Any rights not expressly granted herein are  
reserved.  
3
This is the Internet version of the user's guide. © Print only for private use.  
Getting started  
SIM card  
Getting started  
When you register as a subscriber with a service  
provider, you get a SIM (Subscriber Identity  
Module) card. The SIM card contains a computer  
chip that keeps track of your phone number, the  
services included in your subscription, and your  
phonebook information, among other things.  
Assembling the phone, SIM card, battery,  
making a call.  
More information and downloads are available  
Instruction icons  
The following instruction icons appear in this  
user guide:  
If you have been using a SIM card in another phone,  
make sure that your information is saved to the  
SIM card before you remove it from the other phone.  
For example, contacts may have been saved in the  
phone memory % 19 Phonebook.  
}
Use the selection keys or the navigation  
key to scroll and select. % 10 Navigating  
SIM card and battery  
information  
See also page ...  
Important  
%
Always turn off the phone and detach the charger  
before you insert or remove a SIM card.  
Note  
It may take up to 30 minutes before the battery icon  
appears when charging.  
Contact your service provider for details.  
Assembly  
Before you can use your phone you need to:  
Insert the SIM card.  
Attach and charge the battery.  
4
This is the Internet version of the user's guide. © Print only for private use.  
   
Getting started  
To insert the SIM card and charge  
the battery  
1
2
Insert the SIM card. Make sure the SIM card  
is placed under the silvery holders.  
Place the battery on the back of the phone with  
the label side up and the connectors facing  
each other.  
3
4
Place the back cover as shown in the picture  
and slide it into place.  
Open the connector cover and connect  
the charger to the phone at the flash symbol.  
The flash symbol on the charger plug must  
face upwards.  
5
6
It may take up to 30 minutes before the battery  
icon appears on the screen.  
Wait approximately 4 hours or until the battery  
icon indicates that the battery is fully charged.  
If you do not see the battery icon after this  
30 min.  
time, press any key or  
to activate the screen.  
7
Remove the charger by tilting the plug upwards.  
4 h.  
PIN (Personal Identity Number)  
You may need a PIN (Personal Identity Number)  
to activate the services in your phone. Your PIN  
is provided by your service provider. When you  
enter your PIN, the digits are hidden with an *,  
unless your PIN starts with the same digits  
as an emergency number, for example 112.  
5
This is the Internet version of the user's guide. © Print only for private use.  
         
Getting started  
This is so that you can see and call an emergency  
number without entering a PIN  
Turning on the phone and  
making calls  
Make sure that the phone is charged before you turn  
it on. When you have turned the phone on, you can  
use a setup wizard to quickly and easily prepare  
your phone for use.  
If you make a mistake while entering your PIN,  
delete the number by pressing  
.
If you enter the wrong PIN three times in a row,  
the SIM card is blocked and the message PIN blocked  
appears. To unblock it, you need to enter your PUK  
(Personal Unblocking Key), % 78 SIM card lock.  
Setup wizard  
You can use the setup wizard to help you get started  
with the basic settings in your phone. If you do not  
want help the first time you turn on your phone,  
you can select to use the wizard later. You can also  
select to start the wizard from the menu system at  
any time. The wizard gives you tips on how to use  
the keypad and guides you through the following  
settings:  
Available services  
Some services and functions described in this user  
guide are network- or subscription-dependent.  
Because of this, all menus may not be available  
in your phone.  
Time and time format.  
Date and date format.  
Copying names and numbers from your  
SIM card to Contacts in the phonebook.  
This symbol indicates that a service or function  
is network- or subscription-dependent.  
Please consult your service provider for more  
information about your subscription.  
To start the setup wizard from the  
menu system  
1
2
3
} Settings } the General tab } Setup Wizard.  
Select language for your phone.  
To use the wizard } Yes and follow the  
instructions that appear.  
6
This is the Internet version of the user's guide. © Print only for private use.  
         
Getting started  
To turn on the phone  
To make and receive calls  
Enter the area code and phone number } Call  
to make the call. } End Call to end the call.  
When the phone rings } Yes.  
1
2
Press and hold  
Enter your PIN if you have one for your  
SIM card.  
.
3
At first start-up, select the language you  
want for your phone, that is, the language  
for the menus.  
4
} Yes if you want the setup wizard to help  
you get started, and follow the instructions  
that appear.  
7
This is the Internet version of the user's guide. © Print only for private use.  
     
Getting to know your phone  
Getting to know your  
phone  
1
2
Infrared port.  
Press and hold to activate the camera  
and video recorder.  
Phone overview, using the menus, entering letters,  
file manager.  
3
Volume buttons.  
Screen.  
Phone overview  
4
8
1
5, 11  
6
Selection keys.  
9
2
3
Press once to go back one level in the menus.  
Press and hold to return to standby.  
10  
7
Stereo headset and charger connector.  
Connector cover.  
4
5
8
Press and hold to turn the phone on/off.  
Speaker.  
11  
12  
13  
9
10  
12  
Internet button.  
Navigation key. Press to enter the desktop  
menu. Move through menus, lists and texts.  
6
7
13  
14  
Delete numbers, letters or an item from  
a list.  
Microphone.  
14  
8
This is the Internet version of the user's guide. © Print only for private use.  
     
Getting to know your phone  
Overview, menu  
1. Sony Ericsson* 2. Internet Services* 3. Entertainment  
4. Camera  
5. Messages  
Write New  
Inbox  
My Friends  
Call Voicemail  
Email  
Drafts  
Templates  
Outbox  
6. Radio  
Games  
MusicDJ™  
Record Sound  
7. File Manager  
8. Phonebook**  
8. Phonebook**  
SIM Numbers  
Options:  
Speed Dial  
My Business Card  
Contacts  
9. Media Player  
1
4
2
5
3
6
Pictures  
Sounds  
Videos  
Themes  
Games  
Contacts  
Options:  
Speed Dial  
My Business Card  
Groups  
Sent Items  
Saved Items  
Settings  
7
8
9
Applications  
Other  
SIM Numbers  
Special Numbers  
Advanced  
Special Numbers  
Advanced  
10  
11  
12  
10. Connect  
11. Organizer  
12. Settings  
Online Services  
Bluetooth  
Infrared Port  
Synchronization  
Mobile Networks  
Data Comm.  
Internet Settings  
Streaming Setting  
Accessories  
Calendar  
Tasks  
Notes  
Applications  
Alarm Signal  
Timer  
Stopwatch  
Calculator  
Code Memo  
General  
Profiles  
Sounds & Alerts  
Ring Volume  
Ringtone  
Silent Mode  
Vibrating Alert  
Message Alert  
Key Sound  
Display  
Wallpaper  
Themes  
Startup Screen  
Screen Saver  
Light  
Calls  
Forward Calls  
Manage Calls  
Time & Cost  
Show or Hide No.  
Handsfree  
Time & Date  
Language  
Voice Control  
Phone Status  
Shortcuts  
Locks  
Setup Wizard  
Master Reset  
*Please note that some menus are provider- network- and subscription-dependent.  
**The menu depends on which phonebook is selected as default.  
9
This is the Internet version of the user's guide. © Print only for private use.  
Getting to know your phone  
Navigating the menus  
The main menus are shown as icons on the desktop.  
Some submenus include tabs that appear on the  
screen. Scroll to a tab with the navigation key and  
select an option.  
Phone language  
Most SIM cards automatically set the language  
used in the menu to the language of the country  
where you bought your SIM card. If this is not the  
case, the predefined language is English. If you use  
the setup wizard to help you get started with your  
phone, you will be asked to select phone language,  
1
3
2
You can always choose Automatic language  
by pressing  
You can always choose English by pressing  
0000 in standby.  
8888  
in standby.  
1
Press  
Press  
Move  
to go to the desktop.  
to select highlighted items.  
To change the phone language  
1
} Settings } the General tab } Language  
} Phone Language.  
,
,
,
through menus and tabs.  
2
3
Press to go back one level in the menus.  
Press and hold to return to standby.  
2
Select a language.  
Press to select the options shown immediately  
above these keys on the screen.  
Help texts  
More information, explanations or tips about  
selected features, menus or functions are available  
in your phone.  
To get help  
Scroll to the menu item } Info.  
10  
This is the Internet version of the user's guide. © Print only for private use.  
         
Getting to know your phone  
To edit a standby shortcut  
Shortcuts  
1
} Settings } the General tab } Shortcuts and  
select which shortcut you want to edit } Edit.  
Scroll to a function that you want to create  
a new shortcut to } Shortcut.  
A quicker way to move through the menus is to use  
shortcuts. You can use keypad shortcuts or you can  
create your own shortcuts from standby.  
2
Using keypad shortcuts  
Enter the menus by pressing  
and then enter  
More options  
the number of the menu to which you want to go.  
For example, to reach the fifth menu item, press  
. To reach the tenth, eleventh and twelfth menu  
} More to enter a list of options. There are different  
alternatives in the list of options depending on  
where you are in the menus.  
items, press  
,
and  
respectively.  
To get back to standby, press and hold  
.
Entering letters  
There are two ways of entering letters, for example,  
when writing a message or writing a name in the  
phonebook:  
Creating standby shortcuts  
You can create your own shortcuts and use  
to go directly to that function.  
Multitap text input  
You press each key as many times as needed  
to show the letter you want.  
To create a standby shortcut  
1
Press  
in a direction for which there is no  
T9™ Text Input  
predefined shortcut. } Yes when you are asked  
if you want to create a shortcut.  
The T9 Text Input method uses a built-in dictionary  
to recognize the most commonly used word for  
each sequence of key presses. This way you press  
each key only once, even if the letter you want is  
not the first letter on the key.  
2
Scroll to a function that you want to create  
a shortcut to } Shortcut.  
11  
This is the Internet version of the user's guide. © Print only for private use.  
     
Getting to know your phone  
Writing languages  
Press…  
to get…  
Before you start entering letters, you need to select  
the languages that you want to use when writing.  
When writing, you can switch to one of your  
. , - ? ! ' @ : ; / ( ) 1  
A B C Å Ä Æ à Ç 2 Γ  
D E F è É 3 ∆ Φ  
G H I ì 4  
selected languages by pressing and holding  
.
To select writing language  
1
} Settings } the General tab } Language  
} Writing Language.  
J K L 5 Λ  
2
Scroll to the language that you want to use for  
entering letters and mark each language you  
want. } OK to exit the menu.  
M N O Ñ Ö Ø ò 6  
P Q R S ß 7 Π Σ  
T U V Ü ù 8  
To enter letters using multitap  
text input  
W X Y Z 9  
1
To enter text, you have to be in a function  
where text input is possible, for example  
} Messages } Write New } Text Message.  
+ 0 Θ Ξ Ψ Ω  
space ¶  
2
Press the appropriate key,  
or , repeatedly until the character  
you want appears on the screen.  
,
to delete letters and numbers  
to shift between upper- and lower-  
case letters  
press and hold to enter numbers  
12  
This is the Internet version of the user's guide. © Print only for private use.  
   
Getting to know your phone  
To add words to the T9 dictionary  
Example:  
1
2
While entering letters } More } Spell Word.  
To enter an ‘A’, press  
To enter a ‘B’, quickly press  
To shift between upper- and lower-case letters,  
press , then enter the letter.  
once.  
Edit the word by using multitap input.  
twice.  
Navigate between the letters with  
To delete a character, press  
the entire word, press and hold  
and  
. To delete  
.
.
You can use the volume buttons as a shortcut  
to certain letters: To enter a ‘B’, press and hold  
3
When you have edited the word } Insert.  
The word is added to the T9 dictionary.  
Next time you enter this word using T9,  
and press  
. To enter a ‘C’, press and  
hold  
and press  
.
it will appear as one of the alternative words.  
To enter letters using T9 Text Input  
1
2
} Messages } Write New } Text Message.  
To select another writing method  
Before, or while entering letters, press and hold  
to select another writing method.  
For example, if you want to write the word  
“Jane”, press  
,
,
,
.
3
If the word shown is the one you want, press  
to accept and add a space. To accept  
Options when entering letters  
} More to view a list of options. The list may  
contain some or all of the following:  
a word without adding a space, press  
If the word shown is not the one you want:  
press or repeatedly to view alternative  
words. Accept a word and add a space by  
pressing  
.
Add Symbol – symbols and punctuation marks  
such as ? and , are shown. Move between the  
symbols by using  
,
,
and  
.
.
Add Item – pictures, melodies and sounds.  
Spell Word – for T9 Text Input only. Edit the  
suggested word by using multitap text input.  
Text Format – change style, size and alignment.  
4
Continue writing your message. To enter  
a period or other punctuation marks,  
press  
Accept by pressing  
and then  
or  
.
repeatedly.  
13  
This is the Internet version of the user's guide. © Print only for private use.  
     
Getting to know your phone  
Writing Language – a list of available languages  
is shown.  
Writing Method – a list of methods available  
for the current language is shown.  
Dictionary (T9) – turn T9 text input on or off.  
Word Suggestions – select to view, or not,  
word suggestions when writing a word.  
My Words – manage the words that you have  
added to the dictionary.  
National Chars. – turn off language-specific  
characters to save space. This option appears  
only for some writing languages.  
To move a file to a folder  
1
2
} File Manager and select a folder.  
Scroll to a file, for example, a picture that  
you want to move } More } Manage Files  
} Move to Folder.  
3
Select the folder you want to move the file to,  
or select New folder and name the folder } OK.  
To create a subfolder  
1
2
} File Manager and select a folder.  
} More } Manage Files } New Folder and enter  
a name for the folder.  
3
} OK to save the folder.  
File manager  
To select several files  
Items such as pictures, videos, sounds, themes  
and games are saved as files in folders. All files  
that the phone cannot recognize are saved in the  
Other folder. The phone has several predefined  
folders. You can create your own subfolders  
in the predefined folders to which you can move  
your saved files.  
1
} File Manager and select a file } More  
} Mark Several.  
2
Scroll and select more files by pressing Mark  
or Unmark.  
File information  
Items that are downloaded or received using  
Bluetooth wireless technology, the infrared port,  
text or picture messages may be copyright-protected.  
If a file is protected, you may not be able to copy  
or send that file – a message will appear to inform  
you about this. You can also select to view  
information for the file.  
When handling files, you can select several files  
at the same time to delete, send or move to a folder.  
14  
This is the Internet version of the user's guide. © Print only for private use.  
 
Getting to know your phone  
Quick keys  
Making and receiving calls  
Useful key combinations are described below.  
Make an emergency call  
enter the international  
emergency number  
} Call  
Navigating menus  
Enter the main menu  
and select menu items  
Set the phone to silent  
Call your voicemail  
Enter call list  
press and hold  
press and hold  
} Calls  
Navigate in the menu  
and lists  
Voice dial  
press and hold  
Delete an item  
press  
when  
a volume button or  
say your magic word  
in lists  
Enter a list of options  
} More  
Reach a contact  
beginning with  
a specific letter  
press and hold any of  
Enter the status menu  
to see, for example, date,  
profile, free memory  
and model name  
press a volume button  
once  
the keys  
Speed dial  
press any of the  
number keys  
Change the language  
to Automatic  
8888  
0000  
and } Call  
Change the language  
to English  
Reject a call  
quickly press  
a volume button twice  
when receiving a call  
or } No  
Go back to standby  
press and hold  
15  
This is the Internet version of the user's guide. © Print only for private use.  
         
Getting to know your phone  
Turn off the ringtone  
when receiving a call  
press a volume button  
once or press  
Enter a p (pause)  
press and hold  
when entering  
numbers or saving  
codes  
Put a call on hold  
} Hold  
Retrieve a call  
} Retrieve  
press and hold  
} More  
Using multitap text input  
Turn off the microphone  
Enter a list of options  
Entering letters  
Reach the second letter  
or character of a key  
press and hold  
and press any of the  
number keys  
Reach the third letter  
or character of a key  
press and hold  
and press any of the  
number keys  
Shift between upper-  
and lower-case letters  
press  
,
then the letter  
Delete letters and  
numbers  
press  
Enter a space  
press  
Using T9 Text Input  
View alternative words  
Shift between multitap  
or T9 Text input methods  
press and hold  
press and hold  
or  
Shift between writing  
languages  
Accept a word and add  
a space  
press  
Enter numbers  
press and hold any  
of the number keys  
Enter a full stop  
press  
View alternative  
punctuation marks  
press  
or  
, then  
repeatedly  
Enter the + sign  
press and hold  
16  
This is the Internet version of the user's guide. © Print only for private use.  
         
Calling  
To make a call  
Calling  
1
2
3
Enter the area code and the phone number.  
Calls, phonebook, voice control, call options.  
} Call to make the call.  
} End Call to end the call.  
Making calls  
Before you can make or receive any calls, you must  
turn on the phone and be within range of a network.  
To change the speaker volume during  
a call  
Use the volume buttons on the side of the phone  
to increase or decrease the speaker volume during  
a call.  
Networks  
When you turn on the phone, it automatically selects  
your home network if this is within range. If it is not  
within range, you may use another network, provided  
your service provider has an agreement that allows  
you to do so. This is called roaming.  
You can select the network you want to use,  
or you can add a network to your list of preferred  
networks. You can also change the order in which  
networks are selected during an automatic search.  
For all such options } Connect } Mobile Networks.  
To turn off the microphone during  
a call  
1
Press  
} Mute Microphone, or press and hold  
until the icon for muted microphone is  
displayed.  
2
} Replace?, or press and hold  
to resume the conversation.  
again  
Receiving calls  
When you receive a call, the phone rings and  
Answer? is displayed.  
You can call numbers from the call list and the  
phonebook, % 23 Call list, and % 19 Phonebook.  
You can also use your voice to make calls,  
If your subscription includes the Caller ID  
service and the caller’s number is identified,  
the number is displayed.  
17  
This is the Internet version of the user's guide. © Print only for private use.  
             
Calling  
If you have saved the number in the phonebook,  
Automatic redialing  
The phone redials the number up to ten times  
or until:  
the name and number are displayed. If you have  
assigned a picture to a contact, the picture is also  
displayed. If the number is a restricted number,  
Withheld is displayed.  
The call is connected  
You press Cancel  
You receive a call  
To answer a call  
Automatic redialing is not available for data calls.  
} Yes.  
Do not hold the phone to your ear while waiting.  
When the call is connected, the phone gives  
a loud signal.  
To reject a call  
} No or quickly press a volume button twice.  
To redial a number  
Missed calls  
If the connection of the call failed and Retry?  
is displayed } Yes.  
If you have missed a call, Missed Calls: appears  
in standby indicating the number of missed calls.  
} Yes to view the missed calls in the call list.  
If you want to view the missed calls later } No.  
Making international calls  
When you make an international call, the +  
replaces the international prefix number of the  
country from which you are calling.  
Use  
,
,
and  
to scroll between the tabs.  
To check your missed calls  
1
From standby } Calls and scroll to the missed  
calls tab.  
To make international calls  
2
To call a number from the list, scroll to the  
number } Call.  
1
Press and hold  
on the screen.  
until a + sign appears  
2
Enter the country code, area code (without  
the leading zero) and phone number } Call.  
18  
This is the Internet version of the user's guide. © Print only for private use.  
         
Calling  
Contacts  
Emergency calls  
You can save up to 510 numbers in your contacts.  
You can also add pictures, ringtones and personal  
information, such as email, Web and street  
addresses, to the contacts.  
Your phone supports the international emergency  
numbers 112, 911 and 08. This means that these  
numbers can normally be used to make an emergency  
call in any country, with or without a SIM card  
inserted if a GSM network is within range.  
When you add information to a contact, the  
information is organized under five tabs. Use  
,
In some countries, other emergency numbers may also  
be promoted. Your service provider may therefore have  
saved additional local emergency numbers on the  
SIM card.  
,
and to scroll between the tabs and their  
information fields.  
SIM numbers  
To make an emergency call  
Enter, for example, 112 (the international  
emergency number) } Call.  
On your SIM card, you can save entries as a name  
with a single number. The number of entries you  
can save depends on the amount of memory available  
on the SIM card, see Phonebook } Options  
} Advanced } Memory Status.  
To view your local emergency  
numbers  
} Phonebook } Options } Special Numbers  
} Emergency Nos.  
Contact your service provider for more  
information.  
Phonebook  
Contacts or SIM numbers as default  
phonebook  
You can save your phonebook information in the  
phone memory as contacts or on the SIM card  
as names and numbers. You can choose which  
phonebook – contacts or SIM numbers – is shown  
as default.  
If you select to use contacts as default,  
your phonebook will show all information saved  
in contacts. If you select SIM numbers as default,  
the phonebook will only show names and numbers  
saved on the SIM card.  
For useful information and settings in either  
of these phonebooks } Options.  
19  
This is the Internet version of the user's guide. © Print only for private use.  
             
Calling  
To select contacts or SIM numbers  
Pictures and personal ringtones  
You can add a picture and a personal ringtone  
to a phonebook contact. When that person calls,  
the picture is displayed (provided your subscription  
supports the Caller ID service) and the ringtone  
is played.  
as your phonebook  
1
2
} Phonebook } Options } Advanced  
} My Phonebook.  
Select Contacts or SIM Numbers.  
To add a contact  
1
2
} Phonebook } New Contact } Add.  
Enter the name directly or press Add and enter  
the name } OK.  
To add a picture or a personal  
ringtone to a contact  
1
2
3
} Phonebook and select the contact you  
want to add a picture or ringtone to } More  
} View & Edit.  
Scroll to the relevant tab and select Picture:  
or Ringtone: } Edit. This takes you to Pictures  
or Sounds in the File Manager menu.  
Select a picture or sound. } Save to save the  
picture or sound.  
3
Enter the number directly or press Add and  
enter the number } OK.  
4
5
Select a number type.  
Scroll between the tabs and select fields  
to enter more information. To enter symbols,  
for example, @ in an email address } Symbols  
and select a symbol } Insert.  
6
When you have entered the information you  
want for your contact } Save.  
Calling from the phonebook  
You can call one of the numbers saved for one  
of your contacts, or a number on your SIM card.  
If contacts is the default phonebook, you can  
choose to call from contacts or from the SIM card.  
If SIM numbers is the default phonebook, you  
can only call the numbers on the SIM card.  
To add a SIM number  
If SIM numbers is your default phonebook,  
follow the same steps as for adding a contact.  
You can add only name and number to the SIM  
numbers phonebook.  
20  
This is the Internet version of the user's guide. © Print only for private use.  
     
Calling  
To call a contact  
Updating the phonebook  
1
} Phonebook. Scroll to or enter the first letters  
of the contact you want to call.  
When needed, you can easily update and edit any  
information in your phonebook.  
2
When the contact you want to call is highlighted,  
press  
or  
to select a number } Call.  
To edit a contact  
1
} Phonebook and select a contact } More  
} View & Edit.  
To call a SIM number  
1
} Phonebook. If SIM numbers is the default  
phonebook, select the name and number you  
want to call from the list } Call.  
2
Scroll to the relevant tab and edit the  
information you want to edit } Save.  
2
If Contacts is the default phonebook  
} Phonebook } Options } SIM Numbers and  
select the name and number you want to call  
from the list } Call.  
To edit SIM numbers  
1
If SIM numbers is your default phonebook  
} Phonebook and the number you want to  
edit. If contacts is your default phonebook  
} Phonebook } Options } SIM Numbers.  
Select the name and number you want to edit.  
} More } Edit and edit the name and number.  
Ask to save  
When you end a call, the phone can prompt you  
to add a phone number or email address to your  
contacts.  
2
To delete a contact or a SIM number  
} Phonebook and scroll to the contact or SIM  
To activate ask to save in contacts  
} Phonebook } Options } Advanced  
} Ask To Save } On.  
number you want to delete, press  
.
21  
This is the Internet version of the user's guide. © Print only for private use.  
   
Ca llin g  
To delete all contacts  
To copy names and numbers to the  
SIM card  
1
} Phonebook } Options } Advanced  
} Delete All Contacts.  
1
} Phonebook } Options } Advanced  
} Copy to SIM.  
2
} Yes and enter the phone lock code } OK.  
The default phone lock code is 0000.  
Names and numbers that are saved on the  
SIM card are not deleted.  
2
Select Copy All or Copy a Number.  
To copy SIM numbers to contacts  
1
} Phonebook } Options } Advanced  
} Copy from SIM.  
Default items for contacts  
You can choose which item – a phone number,  
email address or a Web address – that is displayed  
first for each contact.  
2
Select Copy All or Copy a Number.  
Sending contacts  
You can send contacts using Bluetooth wireless  
technology, the infrared port or a text or picture  
message.  
To set the default item for a contact  
1
} Phonebook and scroll to a contact } More  
} Default.  
2
Select the phone number, email address  
or Web address that you want as default item.  
To send a contact  
1
} Phonebook and select a contact } More  
} Send Contact.  
Copying contacts  
2
Select a transfer method.  
You can copy SIM numbers to and from your  
contacts and the SIM card. Choose if you want  
to copy all SIM numbers, or a SIM number.  
To send all contacts  
} Phonebook } Options } Advanced  
} Send All Contacts and select a transfer method.  
When you copy from the phone, all existing  
information on the SIM card will be replaced.  
2 2  
This is the Internet version of the user's guide. © Print only for private use.  
   
Calling  
Checking the memory  
Call list  
With the memory status function in your phonebook,  
you can check how many positions you have left  
in the phone memory and SIM memory.  
The numbers of the last 30 calls that you have  
made are saved in the call list. If your subscription  
includes the Caller ID service and the caller’s  
number is identified, the call list also shows  
the numbers of answered and missed calls.  
In addition to the call list with all numbers,  
there are also separate lists for dialed, answered  
and missed calls, organized under tabs.  
To check the memory  
} Phonebook } Options } Advanced  
} Memory Status.  
Synchronizing contacts  
You can back up and synchronize your contacts with  
a phonebook on the Web. For more information  
about a phonebook on the web, please contact your  
service provider.  
To call a number from the call list  
1
2
} Calls from standby and select a tab.  
Scroll to the name or number you want to call  
} Call.  
1
} Phonebook } Options } Sync. Contacts  
} Select.  
If you have more than one account, select  
which account to use } Select. If you do not  
have an account in the phone, % 67 To enter  
To clear the call list  
} Calls and scroll to the tab with all calls } More  
} Delete all.  
2
Speed dialing  
You can save the phone numbers that you want  
to reach easily in positions 1-9 in your phone  
and on your SIM card. To speed dial with contacts  
as default phonebook, numbers have to be saved  
as contacts, and to speed dial with SIM numbers  
as default phonebook, numbers have to be saved  
on your SIM card.  
23  
This is the Internet version of the user's guide. © Print only for private use.  
         
Calling  
To speed dial  
Calling your voicemail service  
From standby, enter the position number and } Call.  
You can easily call your voicemail service by  
pressing and holding  
. If you have not set your  
To set the position number for speed  
dialing  
voicemail number, you will be asked if you want  
to enter the number. } Yes to enter the number.  
You get the number from your service provider.  
1
} Phonebook } Options } Speed Dial and  
scroll to the position to which you want  
to add a phone number } Add.  
Select a number.  
To enter the number to your  
voicemail service  
2
} Messages } Settings } Voicemail Number.  
To replace a number in the speed  
dial list  
Voice control  
1
2
} Phonebook } Options } Speed Dial.  
Scroll to the number } Replace. Select a new  
number for the position.  
With your phone, you can use your voice to:  
Voice dial – call someone by saying the name.  
Activate voice control by saying a “magic word”.  
Answer and reject calls when using  
a handsfree kit.  
Voicemail  
If your subscription includes an answering service,  
callers can leave a voicemail message when you  
cannot answer a call.  
You can save approximately 30 recorded words  
as voice commands in the phone. Voice commands  
cannot be saved on the SIM card. There are  
25 seconds available for voice commands.  
When recording, make sure that you are in a quiet  
environment and try to use names that are distinct  
Receiving a voicemail message  
Depending on your service provider, you are  
informed that someone has left a message by a text  
message or by a voicemail icon. Press Yes to read  
the text message and call the voicemail service  
to listen to the message.  
24  
This is the Internet version of the user's guide. © Print only for private use.  
     
Calling  
Before voice dialing  
Caller name  
You must first activate the voice dialing function  
and record your voice commands. An icon appears  
next to a phone number that has a voice command.  
You can choose whether you want to hear the  
recorded contact name when you receive a call  
from that contact.  
To activate voice dialing and  
record names  
To turn the caller name On or Off  
} Settings } the General tab } Voice Control  
} Play Caller Name.  
1
} Settings } the General tab } Voice Control  
} Voice Dialing } Activate } New Voice Cmd.  
and select a contact.  
Voice dialing  
2
If the contact has more than one number,  
You can voice dial by saying a prerecorded voice  
command. Start voice dialing from standby using  
the phone, a portable handsfree, a Bluetooth  
headset or by saying your magic word.  
use  
and  
to view the numbers. Select  
the phone number to which you want to add  
the voice command. Now you are going to  
record a voice command such as “John mobile”  
for the phone number you selected.  
Instructions appear. Lift the phone to your ear,  
wait for the tone and say the command that you  
want to record. The voice command is played  
back to you.  
To make a call from the phone  
3
1
From standby, press and hold one of the  
volume buttons.  
2
Lift the phone to your ear, wait for the tone and  
say the name you recorded earlier, for example  
“John mobile”. The name is played back to  
you and the call is connected.  
4
5
If the recording sounds ok } Yes. If not } No  
and repeat step 3.  
To record another voice command for a contact  
} New Voice Cmd. again and repeat steps 2-5  
above.  
To make a call with a handsfree  
From standby, press the handsfree button,  
or Bluetooth headset button.  
25  
This is the Internet version of the user's guide. © Print only for private use.  
     
Calling  
The magic word  
Voice answering  
You can record a magic word and use it as a voice  
command to allow totally handsfree access to voice  
dialing. Instead of pressing and holding a volume  
button to voice dial, you say the magic word and  
then one of your recorded voice commands.  
The magic word is especially suitable when using  
a car handsfree kit.  
You can answer or reject incoming calls by using  
your voice when using a portable handsfree or a car  
handsfree kit.  
You cannot use voice answering if you have selected  
an MP3 file as ringtone.  
To activate voice answering and  
record voice answer commands  
Choose a long, unusual word or phrase that can easily  
be distinguished from ordinary background speech.  
1
} Settings } the General tab } Voice Control  
} Voice Answer } Activate.  
To activate and record the  
magic word  
2
Instructions appear. } Continue and lift the  
phone to your ear. Wait for the tone and say  
“Answer”, or another word. If the recording  
sounds ok } Yes. If not } No and repeat step 2.  
Say “Busy”, or another word } Yes.  
Instructions appear. } Continue and select  
the environments in which you want voice  
answering to be activated. You can select  
several alternatives.  
1
} Settings } the General tab } Voice Control  
} Magic Word } Activate.  
2
Instructions appear. } Continue and lift the  
phone to your ear. Wait for the tone and say  
the magic word.  
3
4
3
Instructions appear. } Continue and select the  
environments in which you want your magic  
word to be activated. You can select several  
alternatives.  
To answer a call using voice  
commands  
When the phone rings, say “Answer” and the call  
is connected.  
26  
This is the Internet version of the user's guide. © Print only for private use.  
         
Calling  
To reject a call using voice  
commands  
Tips when recording and using voice  
commands  
When the phone rings, say “Busy”.  
The call is rejected. The caller is forwarded  
to voicemail, if activated, or hears a busy tone.  
If your phone cannot detect speech, one of the  
following might have happened:  
You spoke too softly – try speaking louder.  
You held the phone too far away – hold it as you  
do during a call.  
Editing your voice commands  
You can keep all your voice commands up to date  
by rerecording them or deleting the ones you do not  
use. You can also edit a voice command for a phone  
number in the phonebook. Select the contact you  
want to edit a voice command for } More  
} View & Edit. Scroll to the relevant tab and edit  
your voice command.  
The voice command was too short – it should  
be around one second long and more than one  
syllable.  
You spoke too late or too soon – speak  
immediately after the tone.  
You did not record the voice command when the  
handsfree was attached – for voice control with  
a handsfree kit, record when the handsfree  
is attached.  
To rerecord a voice command  
1
2
3
} Settings } the General tab } Voice control  
} Voice Dialing } Edit Names.  
Select a voice command } More  
} Replace Voice.  
Lift the phone to your ear, wait for the tone  
and say the command.  
You used another intonation – use the same  
intonation as you did when recording the voice  
command.  
27  
This is the Internet version of the user's guide. © Print only for private use.  
       
Calling  
To deactivate call forwarding  
Forwarding calls  
Scroll to the forward option } Deactivate.  
If you cannot answer incoming calls, you can  
forward them to another number, for example,  
your answering service.  
To check all forwarding options  
} Settings } the Calls tab } Forward Calls  
} Check All.  
When the Restrict calls function is activated,  
some Forward calls options are not available.  
More than one call  
You can choose between the following forward  
options:  
You can handle more than one call simultaneously.  
For example, you can put an ongoing call on hold,  
while you make or answer a second call, and then  
switch between the two calls.  
Always Forward – forward all calls.  
When Busy – forward calls if you are already  
on the phone.  
Not Reachable – forward calls if your phone  
is turned off or if you are unreachable.  
No Reply – forward calls that you do not answer  
within a specified time limit (service provider-  
dependent).  
Call waiting service  
If the call waiting service is activated, you hear  
a beep if you receive a second call during  
an ongoing call.  
To activate or deactivate the call  
waiting service  
To activate call forwarding  
1
2
} Settings } the Calls tab } Forward Calls.  
Select a call type and then one of the forward  
options } Activate.  
} Settings } the Calls tab } Manage Calls  
} Call Waiting.  
3
Enter the phone number to which you want your  
calls to be forwarded, or } Lookup to find the  
contact in your phonebook } OK.  
To make a second call  
1
2
} Hold to put the ongoing call on hold.  
Enter the number you want to call } Call.  
28  
This is the Internet version of the user's guide. © Print only for private use.  
     
Calling  
Receiving a second call  
When you receive a second call, you can do the  
following:  
Conference calls  
In a conference call, you can have a joint  
conversation with up to five other people.  
} Answer to answer the second call and put the  
ongoing call on hold.  
} Busy to reject the second call and continue the  
ongoing call.  
} Replace Active Call to answer the second call  
and to end the ongoing call.  
You can also put a conference call on hold  
and make another call.  
There may be additional charges for calls involving  
multiple parties. Contact your service provider for  
more information.  
Creating a conference call  
Handling two calls  
To create a conference call, you must first have one  
ongoing call and one call on hold. In a conference  
call you can can have a private conversation with  
one of the participants or release a participant.  
When you have one ongoing call and one call  
on hold, you can do the following:  
} Switch to switch between the two calls.  
Press } Join Calls to join the two calls into  
a conference call.  
To join the two calls into  
a conference call  
Press  
} Transfer Call to connect the two calls.  
You are disconnected from both calls.  
} End Call to end the ongoing call, then press  
Yes to retrieve the held call.  
Press  
} Join Calls.  
To add a new participant  
} End Call twice to end both calls.  
You cannot answer a third call without ending  
one of the first two calls or joining them into  
a conference call.  
1
2
} Hold to put the joined calls on hold.  
Press } Add Call and call the next person  
you want to include in the conference call.  
Press } Join Calls.  
Repeat steps 1-3 to include more participants.  
3
4
29  
This is the Internet version of the user's guide. © Print only for private use.  
   
Calling  
To release a participant  
Press } Release Part. and select the participant  
To select a line  
} Settings } the Calls tab and select line 1 or 2.  
that you want to release from the conference call.  
To change the name of a line  
} Settings } the Display tab } Edit Line Names  
and select one of the lines to edit the name.  
To have a private conversation  
1
Press  
} Talk To and select the participant  
that you want to talk to.  
2
} Join Calls to resume the conference call.  
My numbers  
You can view, add and edit your own phone  
numbers.  
Two voice lines  
If you have a subscription that supports alternate  
line service, your phone may have two voice lines  
with different phone numbers.  
To check your phone numbers  
} Phonebook } Options } Special Numbers  
} My Numbers and select one of the options.  
This may be useful if, for example, you want to  
keep business calls and private calls on separate  
lines. You select which line you want to use for  
outgoing calls. All outgoing calls are made on this  
line until you change it. Incoming calls can still  
be received on either line.  
You can change the names of the lines, and have  
different settings for each line, for example,  
different ringtones.  
Accept calls  
With the accept calls service, you can choose  
to receive calls only from certain phone numbers.  
Other calls are automatically rejected by a busy  
tone. If the call forward option When Busy is  
activated, calls are forwarded instead of rejected  
by a busy tone. The phone numbers of calls you  
have rejected are saved in the call list.  
30  
This is the Internet version of the user's guide. © Print only for private use.  
     
Calling  
All outgoing international calls except to your  
home country – Outgoing Intl Roam.  
All incoming calls – All Incoming.  
All incoming calls when you are abroad (when  
roaming) – Inc. When Roaming.  
To add numbers to the accepted  
callers list  
1
} Settings } the Calls tab } Manage Calls  
} Accept Calls } Only From List.  
} Edit } New } Add. This takes you to  
phonebook look up. Select numbers from  
your phonebook.  
2
To activate or deactivate a call  
restriction  
1
} Settings } the Calls tab } Manage Calls  
} Restrict Calls and select an option.  
Select Activate or Deactivate.  
To accept all calls  
} Settings } the Calls tab } Manage Calls  
} Accept Calls } From All.  
2
3
Enter your password } OK.  
Restricted dialing  
Fixed dialing  
You can use the restrict calls service to restrict  
outgoing and incoming calls. This may be useful,  
for example, when you are abroad. To use this  
service, you need a password which you get from  
your service provider  
The fixed dialing function allows calls to be made  
only to certain numbers saved on the SIM card.  
Fixed dialing requires a SIM card that allows fixed  
numbers to be saved. The fixed numbers are  
protected by your PIN2.  
If you forward incoming calls, you cannot activate  
some Restrict calls options.  
Calls to the international emergency number 112 can  
still be made even when the fixed dialing function  
is activated.  
The following calls can be restricted:  
Partial numbers can be saved. For example, saving  
0123456 allows calls to be made to all numbers  
starting with 0123456.  
All outgoing calls – All Outgoing.  
All outgoing international calls – Outgoing Intl.  
31  
This is the Internet version of the user's guide. © Print only for private use.  
     
Calling  
To activate or deactivate fixed  
To check the call time  
} Settings } the Calls tab } Time & Cost  
} Call Timers.  
dialing  
1
} Phonebook } Options } Special Numbers  
} Fixed Dialing and select Activate  
or Deactivate.  
To reset the call time meter  
} Settings } the Calls tab } Time & Cost  
} Call Timers } More and select Reset total  
or Reset Outgoing.  
2
Enter your PIN2 } OK and then } OK again  
to confirm.  
To save a fixed number  
To check the call cost  
} Settings } the Calls tab } Time & Cost  
} Call Costs.  
} Phonebook } Options } Special Numbers  
} Fixed Dialing } Fixed Numbers } New Number  
and enter the information.  
To reset the call cost meter  
} Settings } the Calls tab } Time & Cost  
} Call Costs } More } Clear Total Cost.  
Call time and cost  
During a call, the duration of the call is shown on  
the screen. If you subscribe to cost information,  
you can check the duration of your last call,  
outgoing calls and the total time.You can also  
check the cost of your last call and the total cost  
of your calls.  
Setting the call cost  
You can use the tariff function to specify the price  
per call unit. If you do not specify a price per call  
unit, the number of call units appears.  
If you subscribe to cost information, you must enter  
your PIN2 to reset the cost or time counter.  
32  
This is the Internet version of the user's guide. © Print only for private use.  
   
Calling  
To enter the price per call unit  
Call priority service  
1
} Settings } the Calls tab } Time & Cost  
} Call Costs } More } Set Rate.  
Enter your PIN2 } OK.  
You can request a certain priority when you make  
a call, if your subscription supports the call priority  
service.  
2
3
} Currency and enter the code for the currency  
you want (for example USD for US Dollars)  
} OK.  
The priority levels are defined by your service  
provider and are normally within the range of 0-4,  
where 0 is the highest priority.  
4
} Units and enter the price per call unit } OK.  
To enter a decimal point, press  
.
To check or change your standard  
priority level  
Credit limit for calls  
1
} Settings } the Calls tab } Manage Calls  
} Default Priority.  
You can enter a total amount of money that can  
be used for making calls. When the amount reaches  
zero, no more calls can be made. Please note that  
the credit limit is only an estimated value.  
2
The network sends available priority levels.  
Select a priority level.  
To change the priority for one call  
To set a credit limit  
1
2
Enter the phone number you want to call.  
} More } Call Priority and select a priority.  
The number is called.  
1
} Settings } the Calls tab } Time & Cost  
} Call Costs } More } Set Credit and enter  
your PIN2 } OK.  
2
Select Limited or Unlimited. If you select  
Limited, enter an amount } OK.  
33  
This is the Internet version of the user's guide. © Print only for private use.  
   
Calling  
To send the tones, press the keys  
or  
To clear the screen after the call is finished,  
press  
To turn the tones on or off during a call  
} More in standby and select Turn Off Tones  
or Turn On Tones.  
,
Closed user groups  
.
The closed user group function is a way of lowering  
call costs. If you subscribe to closed user groups  
it is cheaper on some networks to make calls within  
a call group. You can save ten groups.  
.
To add a group  
1
} Settings } the Calls tab } Manage Calls  
} Closed Groups } Edit List } New Group  
} Add.  
Notepad  
You can use the phone to make a note of a phone  
number during a call. When you end the call,  
the number remains on the screen. } Call to call  
the number. } More } Save Number and select  
a contact to save the number. If you want to create  
a new contact and save the number } New Contact.  
2
3
Enter the name of the user group } Continue.  
Enter the index number } Save. You get the  
index number from your service provider.  
To call outside a closed user group  
} Settings } the Calls tab } Manage Calls  
} Closed Groups } Open Calls } On. When Off is  
selected, it is only possible to call within the group.  
Showing or hiding your number  
If your subscription supports the Caller ID  
Restriction service, you can hide your phone  
number when making a call. You can do this per  
call, or select this as a default setting. } More  
in standby to quickly change this default setting.  
Additional calling functions  
Tone signals  
To show or hide your phone number  
You can use telephone banking services or control  
an answering machine by sending tone signals (also  
known as DTMF tones or touch tones) during a call.  
1
2
Enter the phone number you want to call.  
} More and select Hide Number  
or Show Number.  
34  
This is the Internet version of the user's guide. © Print only for private use.  
     
Calling  
To always show or hide your phone  
number  
Business cards  
You can add your own business card to the  
phonebook. You can exchange business cards  
between your phone and another similar phone,  
a PDA or a PC using Bluetooth wireless  
technology, the infrared port, cable or a text  
or picture message.  
1
2
} Settings } the Calls tab } Show or Hide No.  
Select Show Number, Hide Number  
or Network Default.  
Groups  
You can create a group of numbers. By doing so,  
you can send text messages and picture messages  
to several recipients at the same time  
To add your own business card  
} Phonebook } Options } My Business Card  
and enter the information for your business card  
} Save.  
To create a group of numbers  
To send your business card  
1
} Phonebook } Options } Groups  
} Send DTMF Tones } Add.  
} Phonebook } Options } My Business Card  
} Send My Card and select a transfer method.  
2
3
Enter a name for the group } Continue.  
} New Number } Add to find the contact  
in your phonebook.  
To receive a business card  
When you receive the business card } Yes } Save  
to save the business card in the phonebook.  
4
5
Select a number from the contact.  
Repeat steps 3-4 to add more numbers to the  
group. } Done to save the group.  
35  
This is the Internet version of the user's guide. © Print only for private use.  
       
Messaging  
To set the service center number  
Messaging  
1
} Messages } Settings } Text Message  
} Service Center. If the service center number  
is saved on the SIM card, it is shown in the list.  
If there is no number in the list } Add and enter  
the number, including the international “+”  
sign and country code } Save.  
Text messaging, picture messaging, email,  
My Friends, messaging glossary.  
2
Your phone supports various messaging services –  
text messaging, picture messaging, email and  
My Friends. Please contact your service provider  
for details on which services you can use.  
Sending text messages  
For information about entering letters  
Text messaging  
Text messages are sent via SMS (Short Message  
Service). Text messages can contain pictures,  
animations, melodies and sound effects.  
Text messages can be sent to one person, several  
recipients or to a group of recipients that you have  
saved in the phonebook % 35 Groups.  
Some language-specific characters use more space.  
For some languages you can deactivate National Chars.  
To write and send a text message  
1
2
} Messages } Write New } Text Message.  
Write your message } Continue. If you want  
If you send a text message to a group, you are charged  
for each member of that group.  
to save the message for later, press  
} Yes  
to save it in Drafts.  
3
} Phone Number and enter the recipient’s  
phone number, or } Phonebook LookUp  
to retrieve a number or a group from the  
phonebook. To enter an email address  
} Enter Email Addr. A list below the send  
options shows the last 10 recipients. You can  
also select a recipient from this list. } Send.  
Before you start  
First make sure that the number of your service  
center is set. The number is supplied by your service  
provider and is usually saved on the SIM card.  
36  
This is the Internet version of the user's guide. © Print only for private use.  
       
Messaging  
While reading the text message you can,  
for example, go to a Web address found in the text  
message, save a picture found in the text message  
or listen to a sound inserted in the text message.  
When you have read the text message } More  
To insert an item in a text message  
1
2
} Messages } Write New } Text Message.  
While writing your message } More  
} Add Item.  
3
4
Select Picture, Sound Effect, Melody,  
Animation, Templates or Picture (other).  
Select an item.  
to view a list of options. Press  
to close the  
text message.  
Calling a number in a text message  
You can call a phone number that appears in a text  
message.  
Formatting text  
You can change the style, size and alignment of the  
text, and create new paragraphs.  
To call a number in a text message  
To format the text in a text message  
Select the phone number } Call.  
1
2
} Messages } Write New } Text Message.  
While writing your message } More  
} Text Format. Then select Text Size,  
Text Style, Alignment or New Paragraph.  
Select a text format.  
Saving received text messages  
Received text messages are saved in the phone  
memory. When the phone memory is full, you must  
delete messages or move them to the SIM card to  
be able to receive new messages. Messages that  
you have saved on the SIM card remain there until  
you delete them.  
3
Receiving text messages  
When you receive a text message, a message alert  
sounds and a text is displayed that informs you that  
a text message has been received.  
To save a message to the SIM card  
} Yes to read the text message or } No if you  
want to read the message later.  
} Messages } Inbox } More } Save Message } SIM.  
37  
This is the Internet version of the user's guide. © Print only for private use.  
   
Messaging  
To save an item from a text message  
Templates  
1
Select the phone number, Web address, picture  
or sound that you want to save in the message  
} More.  
If you have one or more messages that you send  
often, you can save these as templates. There are  
predefined templates in your phone, but you can  
also create your own templates.  
2
If you have selected to save a phone number  
} Use } Save Number. If you have selected  
a Web address } Save Bookmark, a picture  
} Save Picture, a sound } Save Sound.  
To create a template  
1
} Messages } Templates } New Template  
} Add } Text.  
Long messages  
2
3
Write the message } OK.  
Enter a title for the message } OK.  
The number of characters that a text message can  
contain depends on the language you are writing in.  
You can send a longer message by linking two or  
more messages. Please note that you are charged  
for each of the messages linked in a long message.  
You may not receive all parts of a long message  
at the same time.  
Message options  
You can set a default value for several message  
options or choose the settings each time you send  
a message. You can, for example, select to request  
a reply to a sent message, select what type of text  
message you want to send or set how long a message  
should be valid. For details about the message  
Check with your service provider for the maximum  
number of messages that can be linked.  
To turn long messages on  
} Messages } Settings } Text Message  
} Max. Msg Length } Max. Available.  
To set a default text message option  
} Messages } Settings } Text Message and select  
an option.  
38  
This is the Internet version of the user's guide. © Print only for private use.  
     
Messaging  
To set a message option for  
a specific message  
Before you start  
Before sending a picture message, make sure that:  
1
2
3
When you have selected a recipient to send  
your text message to } More } Advanced.  
Select the option that you want to change  
} Edit and select a new setting.  
1
The address to your message server is set  
} Messages } Settings } Picture Msg.  
} Message Server.  
2
You have entered the correct settings  
} Messages } Settings } Picture Msg.  
} Internet Profile. Select a profile  
} Done when you have changed the options.  
To check the status of a sent  
message  
or New Profile. To create an Internet profile,  
can also download all the settings you need  
automatically from your service provider.  
} Messages } Sent Items and select a text message  
} View } More } View Status.  
Writing and sending picture  
Picture messages  
messages  
Picture messages can contain text, pictures,  
video clips, camera pictures, and sound recordings  
and are sent via MMS (Multimedia Messaging  
Service). You must have a subscription that supports  
MMS, and the receiver of the picture message must  
also have support for MMS. Picture messages can  
be sent to a mobile phone and an email account.  
You can send your business card as an attachment  
in a picture message.  
When composing a picture message, you select  
from different items to format your message.  
The different items are: Picture, Text, Sound, Video,  
Camera Picture, Video Clip and Sound Recording.  
Before sending a picture message, you can select  
from different options to adjust and enhance your  
message. You can, for example, preview the entire  
message or a single page in the message, change  
the timing for items in the message and add or  
replace items to be sent in the message. For details  
about options % 49 Messaging glossary.  
39  
This is the Internet version of the user's guide. © Print only for private use.  
     
Messaging  
To write and send a picture message  
To set a default message option  
} Messages } Settings } Picture Msg. and select  
one of the options.  
1
} Messages } Write New } Picture Msg. } Add  
to view a list of items to add to your message.  
Select an item.  
Additional send options  
2
} Add to add more items to the message.  
You can view and select options to enhance  
the message by highlighting items in the  
message and pressing the left selection key.  
When you have finished writing your message  
} More } Send.  
You can request a read receipt, a delivery report  
and set a priority for a specific message. You can  
also add more recipients to the message. For details  
about the additional send options % 49 Messaging  
3
4
} Phone Number and enter the recipient’s  
phone number, or } Phonebook LookUp  
to retrieve a number or a group from the  
phonebook. To enter an email address  
} Enter Email Addr. A list below the send  
options shows the last 10 recipients. You can  
also select a recipient from this list. } Send.  
To select additional send options  
1
When you have entered the recipient’s phone  
number } More.  
2
Select Add Recipient or Recipients to add more  
recipients, or Advanced to select an additional  
send option.  
Receiving picture messages  
To make a call while writing a picture  
message  
When you receive a picture message, a message  
alert sounds and a text is displayed that informs  
you that a message has been received.  
1
2
While writing your message } More.  
} Make a Call and enter or retrieve a phone  
number } Call. You return to the message.  
To end the call } More } End Call.  
3
40  
This is the Internet version of the user's guide. © Print only for private use.  
Messaging  
} Yes to read or play the message. Press any key  
to stop. When you have read the message } Reply  
to reply immediately or } More to view a list of  
Automatic download  
You can select how you want your picture  
messages to be downloaded.  
options. Press  
to close the message.  
} Messages } Settings } Picture Msg.  
} Auto Download to view the following:  
You can select a message from the list of messages and  
Always – your phone automatically downloads  
messages to your phone as soon as they come  
to your service provider’s server. This is default.  
Ask in Roaming – you will be asked if you want  
to download messages when you are using  
another network than your service provider’s.  
Never in Roam – the messages are never  
downloaded when you are using a network other  
than your service provider’s.  
Always Ask – you will always be asked if you  
want to download messages regardless of the  
network being used.  
Off – new messages appear in the inbox as icons.  
Select the message } View } Yes to download.  
press to delete the entire message.  
Save items from a picture message  
When you have viewed a picture message, you can  
save items from the message. } More } Save Items  
and select an item from the list that appears.  
Templates  
You can base your message on one of the  
predefined templates. You can also add new  
templates.  
To use a predefined template for  
a picture message  
1
2
} Messages } Templates and select a template.  
} Use } Picture Msg. } Add to make changes  
or add new items.  
3
} More } Send to send the message.  
41  
This is the Internet version of the user's guide. © Print only for private use.  
     
Messaging  
To view a sent postcard  
} Messages } Sent Items and highlight the message  
} View.  
Postcard  
You can have a message with picture and text  
delivered as a postcard to a street address.  
This service is not available in all countries.  
Another way of sending a postcard is to use the  
phonebook by selecting a contact, More } Send  
Message } Postcard. You can also create a postcard  
by selecting File Manager } Pictures. Select a picture  
} More } Send } As Postcard.  
Email  
You can use your phone to send and receive email  
messages. Please note that you need a subscription  
that supports data transmission. For more  
information, contact your service provider.  
Before you start  
To send a postcard  
First make sure that:  
1
2
} Messages } Write New } Postcard } Add.  
Select Picture or Camera Picture to add  
a picture to your message.  
You have set up a data account, % 63 Entering  
You have set up and selected an email account.  
3
} Add } Text to add a message to accompany  
the picture.  
Email account settings  
4
5
Write your message } OK.  
An email account specifies, for example, the server  
that is used for your email messages. There are  
three ways to create an email account:  
} Send } Street Address to enter name and  
address, or you can either select Phonebook  
LookUp to retrieve a contact, or select  
a recipient from the list of previous recipients.  
When you have entered name and address  
} OK } Send. The picture and message will  
be printed on a postcard and sent to the address  
you choose.  
Download settings from Internet  
Send a request in a text message  
Create an email account manually  
6
42  
This is the Internet version of the user's guide. © Print only for private use.  
       
Messaging  
Receiving settings  
Default email account  
At www.SonyEricsson.com you can get support  
on how to enter your email settings. Some service  
providers provide a service with which you can  
request settings in a text message. Contact your  
service provider for information about your settings.  
If you have both an office and a home email account,  
you can set one of them as default: } Messages  
} Email } Settings and select an account.  
Writing and sending email messages  
When writing and sending your email message,  
you can select from several options to accompany  
your message. For details about the options  
To request settings in a text message  
} Messages } Email } Settings } Auto Configure.  
} Messages } Email } Inbox } More  
} Send & Receive offers the fastest way to check  
for new email messages.  
To create an email account manually  
1
2
} Messages } Email } Settings } New Account.  
Enter a name for the account, for example  
“Home” or “Office” } Connect Using.  
The number of email messages that can be saved  
depends on memory left in the phone. All email  
messages are also saved on your email server, and you  
can view both older and newer messages on the server.  
3
4
Select the data account that you want to use  
with this email account.  
Enter the rest of the settings, some of which  
are optional. To enter the settings, scroll to the  
setting } Select. Enter the information } OK to  
confirm. Repeat this for each required setting.  
You use the same email settings in your phone  
as in your PC email program. If you do not have  
an email service, contact your service provider  
to get all the necessary settings. For details  
about the settings % 49 Messaging glossary.  
To write and send an email message  
1
2
} Messages } Email } Write New.  
Write the subject for your message } OK and  
then the text } OK.  
} Enter Email Addr. to enter an email address  
or } Phonebook LookUp to retrieve an address  
from your phonebook.  
3
4
} Send to send your email message or } More  
to view a list of options for your message.  
43  
This is the Internet version of the user's guide. © Print only for private use.  
Messaging  
To receive and read email messages  
To delete an email message  
(POP3 users)  
1
} Messages } Email } Inbox } More  
} Send & Receive to download new messages.  
Select a message to read it.  
1
} Messages } Email } Inbox and select the  
message } More.  
2
2
Select Mark for Deletion. The message  
is deleted the next time you connect to your  
email server.  
To reply to an email message  
1
2
Open the email message } Reply.  
Write your message. } More to view options  
for the message.  
To delete an email message  
(IMAP4 users)  
3
} Send to send the message.  
1
2
3
} Messages } Email } Inbox and select the  
message } More.  
} Mark for Deletion. The message is marked  
for deletion on the server.  
} More } Clear Inbox. The message is deleted  
the next time you connect to your email server.  
To save an email address or a phone  
number in an email message  
1
Select the email address or phone number that  
you want to save } More.  
2
If you have selected to save an email address  
} Use } Save Email. If you have selected to  
save a phone number } Save Number.  
To save an email message  
1
Open the email message } More  
} Save Message.  
2
The message is saved in Saved Items in the  
Email menu.  
44  
This is the Internet version of the user's guide. © Print only for private use.  
 
Messaging  
Log in to the My Friends server  
My Friends  
You can select to log in to your My Friends server  
each time you want to send or receive instant  
messages, or you can be logged in automatically  
when you turn on your phone. You can edit the  
settings for your My Friends account. To set  
automatic log in and edit your account settings you  
have to be logged out from the My Friends server.  
The My Friends function gives you more options  
when messaging. You can create a list of favorite  
contacts either from the phonebook or from the  
My Friends server. You can see which of your  
contacts are online and what mood they are in.  
To see contacts online, they have to be connected  
to the My Friends server. You can also send and  
receive instant messages and join community chats.  
Please contact your service provider for information  
about your subscription and My Friends settings.  
To log in to your My Friends server  
} Messages } My Friends } Myself } Log In.  
To set automatic log in  
} Messages } Myself } More } Accounts } Edit  
} Auto-Login } On.  
My Friends contacts  
You can add contacts from the phonebook to a list  
of contacts in My Friends, even if you do not have  
a My Friends account and are not connected to the  
My Friends server. You can then quickly access  
your favorite contacts and choose how you want  
to communicate with them.  
To edit the My Friends account  
} Messages } Myself } More } Accounts } Edit  
and edit your settings.  
List of contacts  
You can create a list of contacts – people you want  
to send messages to on a regular basis. You can add  
contacts from your phonebook or from your  
My Friends server.  
45  
This is the Internet version of the user's guide. © Print only for private use.  
     
Messaging  
To add a contact from the phonebook  
Availability – select what to show others  
when you are online, Available, Busy, Away,  
or Invisible. If you select Invisible, you will  
appear as offline to others.  
1
2
3
} Messages } My Friends } More  
} Add Contact } From Contacts.  
Enter the first letters of the contact and then  
select a contact.  
Mood – select a mood from the list.  
Show My Status } To All if you want to show  
full status to friends but limited status to others,  
and } Only To contacts if you want to show full  
status to friends but nothing to others.  
Username: – view your username.  
When you have selected a contact, you can  
choose to subscribe to status information for  
that contact. To subscribe } Yes and follow the  
instructions that appear. } No if you do not  
want to subscribe.  
To view the status of a contact  
} Messages } My Friends and select a contact  
} More } View Status.  
To add a contact from a network  
server  
} Messages } My Friends } More } Add Contact  
} From Server and follow the instructions  
that appear.  
To change your own status  
} Messages } My Friends } Myself } Change Status  
and edit your status according to the options.  
Status  
You can view the status of your contacts and choose  
to show your own status to others. You can also  
change your own status with the help of the  
following options:  
To send a message from My Friends  
1
2
} Messages } My Friends and select a contact.  
If the contact is linked to your phonebook  
} More } Send Instant Msg. } Send. If not,  
select the contact } Send IM.  
Picture – select a picture from Pictures or take  
a picture with the camera. You can change,  
update or remove pictures.  
About Me – write a short text about yourself.  
46  
This is the Internet version of the user's guide. © Print only for private use.  
Messaging  
Receiving a message  
Strangers  
When you receive a message, a message alert  
sounds or an icon appears in the status bar.  
A stranger is someone that is not in your list  
of contacts. An icon indicates a message from  
a stranger. You can add the stranger to your list  
of contacts, or you can block the stranger. If you  
do not perform any action, the stranger disappears  
when you log out from the My Friends server.  
Contact list  
You can create nicknames for the contacts in your  
list that are connected to the My Friends server.  
You can also link a contact to the phonebook and  
get access to all information saved in the  
phonebook.  
To add a stranger to the list of  
contacts  
} Messages } My Friends and select the stranger  
} More } Add As Contact.  
To enter a nickname  
1
2
3
} Messages } My Friends, and select a contact.  
} More } Manage Contact } Edit Nickname.  
Enter the nickname for that contact } Save.  
Blocking contacts and strangers  
You can block a contact or stranger so that they  
cannot view your status or send you messages.  
To link a contact to the phonebook  
To block or unblock a contact  
1
2
} Messages } My Friends and select a contact.  
} More } Manage Contact } Link to Contacts  
and select the contact in phonebook that you  
want to create a link to.  
1
2
} Messages } My Friends and select a contact.  
} More } Manage Contact.  
Select Block Contact or Unblock Contact.  
To block a stranger  
} Messages } My Friends and select the stranger  
} More } Block User.  
47  
This is the Internet version of the user's guide. © Print only for private use.  
       
Messaging  
Chatroom  
To search for a chatroom  
A chatroom can be started by your service provider,  
by an individual My Friends user or by yourself.  
You can save chatrooms either by saving a chat  
invitation or by searching for a specific chatroom.  
1
2
3
} Messages } My Friends } More  
} Add chatroom } No.  
Enter your search criteria in one or several  
of the fields } Search.  
When you have found the chatroom you want  
to save } Add.  
To join a chatroom  
Messages } My Friends and select a chatroom  
} Join Chat.  
To start a chatroom  
1
2
3
} Messages } My Friends } More  
} Start chatroom.  
Select contacts to invite to the chatroom from  
your list of contacts } Continue.  
Enter a short invitation text to the chatroom  
} Continue } Send.  
To receive a chat invitation  
1
When a message alert sounds and the message  
New chat invitation received. is displayed select  
View to view the invitation or Discard to  
discard the invitation.  
2
If you have selected to view the invitation and  
want to join the chat } Join Chat. If you want  
to discard the invitation now } More  
} Discard Invitation.  
Online contact alert  
You can select to be notified when a contact comes  
online. The notification is indicated by an icon.  
When you log off or when the contact has come  
online, the notification is cleared.  
To save a chat invitation  
When you receive an invitation } View } More  
} Save Chatroom.  
To set an online contact alert  
} Messages } My Friends and select a contact  
} More } Manage Contact } Alert Me.  
48  
This is the Internet version of the user's guide. © Print only for private use.  
Messaging  
Area information  
Messaging glossary  
Area information is a type of text message  
(for example, a local traffic report) that is sent  
to all subscribers within a certain network area.  
When you receive an area information message,  
the message automatically appears on the screen.  
Press Save to save the message in your inbox,  
or Discard to delete the message.  
Options and settings for text, picture and email  
messages are listed below:  
Accept Messages – select which messages you  
want to accept and download.  
Add Attachment – add, for example, pictures,  
sounds, themes, video clips, business cards  
or recordings to a message.  
Check Interval – select how often you want the  
phone to connect to your email server and check  
for incoming email messages.  
Please consult your service provider for more  
information about area information.  
Connect Using – select which data account to use  
when connecting to a specific email account.  
Copy Outgoing – select if you want email  
messages sent from your phone also to be sent  
to an email address of your choice. This way,  
your sent messages are copied and can be saved  
for future reference.  
Creation Mode – select settings for what to allow  
in picture messages. Some content in picture  
messages might be difficult for the recipient  
to view.  
To turn area information on or off  
} Messages } Settings } Area Info } Reception.  
Cell information  
The cell information channel is used by some  
service providers to send messages about a certain  
network area to their subscribers within that area.  
To turn on the cell information  
channel  
} Messages } Settings } Area Info  
} Cell Information.  
Delivery Report – request a status report to verify  
whether a message has been delivered.  
Download – select whether to receive headers  
and text or headers only in email messages.  
49  
This is the Internet version of the user's guide. © Print only for private use.  
       
Messaging  
Incoming Port – if needed, change the number  
Saved in Drafts. – save the email message  
in the Drafts folder.  
Save in Outbox – save the email message  
in the Outbox folder.  
Set Priority – set the message priority,  
select High, Normal or Low.  
of the port used by the protocol you are using.  
Incoming Server – enter the name or IP address  
of the service provider for incoming email  
messages. For example, mail.server.com  
or 10.1.1.1.  
Mailbox – enter a username for your email  
account.  
Signature – select if you want to add your  
business card to your email messages.  
SMS Type – the phone supports different types  
of messages. Your service provider may offer  
the facility of converting a text message into  
a format (email or fax, for example) that suits the  
equipment that is going to receive the message.  
Sound – add a sound, or replace with  
an alternative, from the Sounds folder.  
Status Request – request a status report to verify  
whether a message has been delivered.  
Subject: – write a title for your message.  
Timing – set how many seconds you want  
an item in a message to be displayed.  
Validity Period – if your message cannot  
be delivered, for example, if the recipient has  
turned off the phone, your service center can  
save the message to send it later.  
Outgoing Port – if needed, change the number  
of the port used by the SMTP protocol.  
Outgoing Server – enter the name or IP address  
of the SMTP server to be able to send email  
messages.  
Password – enter a password for your email  
account. Your service provider may alternatively  
request a password on connection.  
Picture – add a picture, or replace with  
an alternative from the Pictures folder.  
Preview – view the entire picture message  
before sending it.  
Preview Page – view a specific page in the  
picture message without having to play the  
entire message  
Protocol – select POP3 or IMAP4.  
Request Reply – include a reply request if you  
want the recipient of your message to reply.  
Video – add a video clip, or replace with  
an alternative, from the Videos folder.  
50  
This is the Internet version of the user's guide. © Print only for private use.  
Imaging  
Before you send a picture or video clip using MMS  
make sure that:  
Imaging  
Camera, video recorder, pictures, screen saver.  
You have set the service center number for MMS  
and that Internet settings are entered in your  
Camera and video recorder  
Your phone has a digital camera and a digital video  
recorder. You can easily switch between the camera  
and the video recorder by pressing  
You can also press More and select Switch to Video  
Before you send a picture or video clip using email  
make sure that:  
or  
.
You have entered settings for a data account and  
for an email account in your phone.  
or Switch to Photo.  
To take pictures  
You can take pictures, record video clips,  
view them and send them as email attachments  
or in picture messages via MMS (Multimedia  
Messaging Service). To do this, you need  
a subscription that supports these services.  
Please check with your service provider.  
You can also use a picture as a screen saver or as  
wallpaper, or save it together with a contact in your  
phonebook so that the picture appears when that  
1
2
Press and hold  
or } Camera. You can take pictures with the  
phone held in a vertical or horizontal position.  
to activate the camera  
Before you start  
The phone that you are sending the picture or video  
clip to needs to support data transmission and  
picture messaging in order to receive and show the  
picture or video clip.  
Press  
to switch to camera if video recorder  
is activated. } Capture to take a picture.  
51  
This is the Internet version of the user's guide. © Print only for private use.  
       
Imaging  
To record video clips  
Rotate pictures  
If a picture is taken in landscape format, it can  
be rotated. To send pictures in a picture message,  
the picture must be in portrait format.  
To rotate a picture  
When the picture is taken } Rotate and repeat  
if necessary.  
Camera options  
1
2
Press and hold  
recorder or } Camera. You record video clips  
with the phone held in a vertical position.  
to activate the video  
When the camera is activated press } More to view  
more options.  
All phones that support pictures can receive the picture  
size 160x120. Some phones that support pictures  
cannot receive the picture sizes 640x480 and 320x240.  
The best picture size to view on a PC is 640x480.  
Press  
to switch to video recorder if the  
camera is activated. } Record to start the  
recording.  
Options before you take a picture:  
To use the zoom  
View All – view all your pictures.  
Switch to Video – switch to video recorder  
to record video clips.  
Press  
to zoom in on the subject.  
To adjust brightness  
Picture Size – choose between 640x480,  
320x240 and 160x120 pixels.  
Night Mode – enhance picture quality with longer  
exposure time.  
Effects – select different effects for your picture  
or create a panorama picture.  
Use the volume buttons on the side of the phone  
to increase or decrease brightness.  
52  
This is the Internet version of the user's guide. © Print only for private use.  
     
Imaging  
Frames – add a frame to your picture.  
Picture Quality – select quality for your picture.  
Light – turn on to enhance lighting conditions.  
Self-Timer – the picture is taken a few  
seconds later.  
Take a self-portrait  
Default Name – change the default name for your  
pictures. When changed, all pictures taken will  
have the new default name.  
Video options  
1
2
Hold the phone as shown in the illustration.  
You can see your reflection in the mirror  
provided.  
When the video recorder is activated } More  
to view more options.  
View All – view all your video clips.  
Switch to Photo – switch to the camera to take  
pictures.  
Press and hold  
on the side of the phone  
to activate the camera. Press  
the picture.  
again to take  
Video Size – choose between 176x144 and  
128x96 pixels.  
Night Mode – enhance picture quality with longer  
exposure time.  
Effects – select different effects for your  
video clip.  
Saving pictures and video clips  
When you have taken a picture or recorded a video  
clip, the phone automatically saves it in a folder  
in File Manager in the phone.  
Sending pictures and video clips  
When you have taken a picture or recorded a video  
clip, you can send them instantly in a picture  
message. To exchange pictures and video clips  
using other transfer methods % 55 Exchanging  
Video Length – set the length for your video clip.  
Light – turn on to enhance lighting conditions.  
Default Name – change the default name for your  
video clips. When changed, all video clips  
recorded will get the new default name.  
53  
This is the Internet version of the user's guide. © Print only for private use.  
       
Imaging  
To take and send a picture  
To create a panorama picture  
1
Activate the camera. Press  
to switch  
1
2
} Camera } More } Effects } Panorama.  
} Capture to take the first picture for the  
panorama picture.  
to camera if the video recorder is activated.  
} Capture } Send and create your picture  
message.  
2
3
4
Move the camera to the next part of the subject  
and } Capture again to take the next picture.  
} Done and the picture is created.  
To record and send video clips  
1
2
3
Activate the camera. Press  
to switch  
to video recorder if the camera is activated.  
} Record to start the video recording } Stop  
to end the recording.  
When you have finished your recording select  
Play to view the video clip or Send and create  
your picture message to send the video clip.  
Pictures  
Your phone comes with a number of pictures.  
You can delete the pictures that comes with your  
phone if you, for example, want to free memory.  
All pictures are saved in File Manager } Pictures.  
You can:  
Have a picture as wallpaper and as screen saver.  
Assign a picture to a contact in the phonebook.  
Exchange pictures using Bluetooth wireless  
technology, the infrared port, cable, picture  
messages or email.  
Creating a panorama picture  
You can create a panorama picture by taking  
a series of three pictures that are merged into  
one picture.  
For best result when creating a panorama picture,  
make sure that the pictures you take overlap.  
Animations  
You can save animations in your phone.  
Animations are handled like pictures.  
54  
This is the Internet version of the user's guide. © Print only for private use.  
       
Imaging  
Handling pictures  
To edit and save a picture  
You can add, edit, or delete pictures in File Manager.  
The number of pictures that you can save depends  
on the size of the pictures. File types supported are  
GIF, JPEG, WBMP, PNG and BMP.  
1
} File Manager } Pictures and scroll to the  
picture you want } More.  
2
} Use } Edit. You can now start to edit the  
picture. To edit pictures taken with the camera,  
you must select 160x120 as picture size.  
} More } Save Picture to save the picture.  
To view your pictures  
1
2
} File Manager } Pictures.  
The pictures are shown in thumbnail view.  
To get a full view } View.  
Exchanging pictures  
You can exchange pictures using Bluetooth  
wireless technology, the infrared port, cable,  
picture messages or email. Please note that you  
are not allowed to exchange copyright-protected  
material. For more information on sending pictures  
in messages % 36 Messaging.  
Editing pictures  
When editing pictures press  
the keys as follows:  
,
,
,
or use  
exit the picture editor  
undo  
To send a picture  
left up  
left  
up  
right up  
right  
1
} File Manager } Pictures and scroll to the  
picture you want } More } Send.  
Select a transfer method.  
activate  
tool  
2
left down  
down  
right down  
select tool  
select  
colour  
55  
This is the Internet version of the user's guide. © Print only for private use.  
   
Imaging  
To receive and save a picture  
Screen saver and wallpaper  
1
Open the message you received the picture in,  
or turn on Bluetooth or the infrared port if these  
transfer methods are being used to send the  
picture.  
The phone has a screen saver which is activated  
automatically when the phone has been in idle  
mode for a few seconds. After a few more seconds,  
the screen saver changes to sleep mode to save  
power. If you have a picture as wallpaper,  
this picture is shown in standby mode.  
2
If you received the picture in a message } More  
} Save Picture. If you received the picture via  
Bluetooth or Infrared, follow the instructions  
that appear on the screen.  
To use a picture as screen saver  
1
} Settings } the Display tab } Screen Saver  
} Picture.  
Remote screen  
You can view your pictures on a remote screen,  
for example, a TV, using Bluetooth wireless  
technology and an adaptor. You can then use the  
phone to control the screen. Use the slide show  
function to show several pictures in a row.  
2
Select the picture you want to use  
as screen saver.  
To set a picture as wallpaper  
} Settings } the Display tab } Wallpaper } Picture  
and select the picture you want to use as wallpaper.  
To connect to a remote screen  
1
} File manager } Pictures } More  
} Remote screen.  
2
The phone searches for other Bluetooth  
devices and a list of available devices is  
displayed. Select the device you want to use.  
For more information about connecting using  
56  
This is the Internet version of the user's guide. © Print only for private use.  
     
Entertainment  
Media player control  
Entertainment  
} Pause to pause the playback.  
Press and hold and to rewind and fast  
forward when playing music tracks.  
Media player, sounds, themes, games.  
Press  
Press  
and  
and  
to move between music tracks.  
to scroll through the music list.  
Media player  
The media player works as a music player and video  
player all in one. You can play music and video  
clips that you receive in a picture message, or that  
you download to your phone. The following are  
supported by the media player: MP3, MP4, 3GP  
and WAV (with 16 kHz as maximum sample rate).  
You can also stream music and videos from  
Web sites. When streaming, links have to be 3GPP  
compatible.  
Media player options  
} More to view the following options:  
Play Video – play videos.  
Play Music – play music.  
Information view information about the current  
track or video.  
Delete Song/Delete Video – delete the file from  
the phone.  
Equalizer – change the settings of the treble and  
bass when playing music.  
Minimize – minimize the media player and return  
to standby. The music continues to play and you  
can use other applications and functions  
in the phone.  
Send Song/Send Video – send a sound or video  
file using Bluetooth wireless technology, the  
infrared port, text or picture messages or email.  
Random – change the playback order of songs,  
in order or randomized.  
Music and video clips  
You can listen to music and view video clips that  
you have saved in your phone. The music list keeps  
on playing until you press Stop.  
To play music  
} Media Player and select a file } Play.  
To view a video clip  
} Media Player } More } Play Video and select the  
video clip you want to view.  
57  
This is the Internet version of the user's guide. © Print only for private use.  
         
Entertainment  
Online music and videos  
To select a ringtone  
You can view videos and listen to music that you  
find on a Web site by streaming them to your  
phone. When browsing and when you have found  
a link for streaming, the media player will open  
automatically when the link is selected. Links for  
streaming can be saved as bookmarks in the phone.  
} Settings } the Sounds & Alerts tab } Ringtone.  
To turn the ringtone on or off  
Press and hold  
from standby. All signals  
except the alarm signal are turned on or off.  
To set the ringtone volume  
1
} Settings } the Sounds & Alerts tab  
To stream saved music and videos  
} Ring Volume and press  
or increase the volume.  
} Save to save the setting.  
or  
to decrease  
1
2
} Internet Services } More } Bookmarks.  
Select a link to stream. The media player will  
open and play the streaming music or video.  
2
Specific ringtones for personal calls  
If your subscription includes the Caller ID service,  
you can assign a personal ringtone to up to ten  
Ringtones and melodies  
Your phone comes with a number of standard and  
polyphonic melodies which can be used as ringtones.  
You can exchange melodies via Bluetooth wireless  
technology, the infrared port or cable. Please note  
that you are not allowed to exchange copyright-  
protected material.  
Vibrating alert  
You can choose to be notified of an incoming call  
by the buzzing of the vibrating alert. You can set:  
If you select an MP3 file as ringtone, you cannot use  
voice answering % 26 Voice answering. Select a file  
type other than MP3 to be able to use voice  
answering.  
On – all the time.  
On if in Silent – on when the ring volume  
is turned off or when you have set the phone  
to silent.  
Off – all the time.  
58  
This is the Internet version of the user's guide. © Print only for private use.  
             
Entertainment  
To set the vibrating alert  
To compose a melody  
} Settings } the Sounds & Alerts tab  
} Vibrating Alert and select the setting you want.  
1
2
} Entertainment } MusicDJ™.  
Choose to Insert, Copy and Paste blocks to  
compose your melody. Use or  
to move between the blocks. Press to  
delete a block. } More to view more options.  
,
,
Sounds and alerts options  
From Settings } the Sounds & Alerts tab,  
you can set:  
Message Alert – select how you want  
to be notified of an incoming message.  
Key Sound – select what sound you want  
the keys to make when you press them.  
To edit a previously created melody  
} File Manager } Sounds and select the melody  
} More } Use } Edit.  
Sending and receiving  
Composing  
You can send and receive melodies in several  
ways, for example using Bluetooth wireless  
technology, the infrared port, email or text  
or picture messages.  
You can compose and edit melodies to use  
as ringtones using the MusicDJ . A melody  
consists of four tracks – Drums, Basses, Chords  
and Accents. A track contains a number of music  
blocks. The blocks consist of pre-arranged sounds  
with different characteristics. The blocks are  
grouped into Intro, Verse, Chorus, and Break.  
You compose a melody by adding music blocks  
to the tracks.  
You cannot send a polyphonic melody or an MP3 file  
in a text message.  
To send a melody  
1
2
} File Manager } Sounds and select a melody.  
} More } Send and select a transfer method.  
59  
This is the Internet version of the user's guide. © Print only for private use.  
     
Entertainment  
To receive a melody  
To end and play a sound recording  
} Save to end the recording, and } Play to listen  
to the recording.  
1
Open the message you received the melody  
in, or turn on Bluetooth or the infrared port  
if these transfer methods are being used  
to send the melody.  
Recording options  
} More to view the following options:  
Record New, Send, Rename, Delete,  
Recorded Sounds.  
2
When you receive the melody, follow the  
instructions that appear on the screen.  
Sound recorder  
Listening to recordings  
You can listen to your recordings at any time,  
even during a call.  
With the sound recorder, you can record either  
your own memos or calls. When recording a call  
conversation, the recording is stopped if any  
participant ends the call. When recording a sound,  
the recording stops automatically if you receive  
a call. Recordings are automatically saved  
in the phone.  
To listen to your recordings  
1
} File Manager } Sounds and select the  
recording you want to hear.  
2
} Play to listen to the recording. Press  
and  
to go to the previous or next recording.  
In some countries or states it is required by law that  
you inform the other person before recording the call.  
} Stop to stop playback.  
To start a sound recording  
1
2
} Entertainment } Record Sound.  
Wait until you hear a tone. When the recording  
starts, Recording is displayed together with the  
time of the current recording (increasing).  
60  
This is the Internet version of the user's guide. © Print only for private use.  
 
Entertainment  
Saving radio channels  
Radio  
You can save up to 20 of your favorite radio  
channels.  
Your phone features an FM radio. To use the radio,  
you must connect the portable handsfree.  
The handsfree functions as an antenna.  
To save channels quickly in positions 1 to 10, press  
and hold 0–9, (where 0 represents the number 10).  
To select a channel you have saved in positions  
1 to 10, press 0–9.  
You must switch your phone on to use the FM radio.  
Do not switch the phone on in areas where mobile  
phones are prohibited, % 84 Guidelines for Safe and  
To save a radio channel  
} Radio } More } Save } Insert. The channel  
is saved in a list.  
To listen to the radio  
More options  
} More for the following options:  
Minimize – return to standby to use other  
functions with the radio still playing.  
Save – save the current frequency in a list  
of channels.  
Channels – select, add, edit or delete saved  
channels.  
Turn On Speaker – send the sound through the  
loudspeaker.  
Set Frequency – enter a frequency manually.  
The figures you enter will be automatically  
adjusted to valid frequencies. Press  
to go directly to Set Frequency.  
Connect the portable handsfree to the phone  
} Radio.  
Radio control  
When the radio is on:  
} Search or press and hold  
next channel on the FM band.  
or  
to find the  
Press  
FM band.  
Press or  
or  
to move 0.1 MHz along the  
for the next preset channel.  
61  
This is the Internet version of the user's guide. © Print only for private use.  
   
Entertainment  
Auto-Save – automatically search for and save  
channels in a list of channels. Previously saved  
channels will be replaced.  
Turn On Mono – turn mono sound on.  
To select or change a theme  
} File Manager } Themes and select a theme.  
Exchanging themes  
You can exchange themes using Bluetooth wireless  
technology, the infrared port or email. Please note  
that you are not allowed to exchange copyright-  
protected material.  
While listening to the radio  
If you minimize the radio display, you can listen  
to the radio and use other functionality at the same  
time. For example, you can make and receive calls,  
send messages and play games.  
To send a theme  
1
} File Manager } Themes and select a theme  
} More } Send.  
To minimize the radio display  
} Radio } More } Minimize.  
2
Select a transfer method.  
To adjust the volume  
To receive and save a theme  
Press the volume buttons on the side of the phone.  
1
Open the message you received the theme in,  
or turn on Bluetooth or the infrared port if  
these transfer methods are being used to send  
the theme.  
Themes  
You can change the appearance of the screen,  
for example, the colours and wallpaper, by using  
themes. Your phone comes with some predefined  
themes. You cannot delete these, but you can create  
new themes and download them to your phone. For  
more information, visit www.SonyEricsson.com.  
2
When you receive the item, follow the  
instructions that appear on the screen.  
To download a theme  
} File Manager } Themes and scroll to a direct link  
} Go To.  
62  
This is the Internet version of the user's guide. © Print only for private use.  
   
Connectivity  
Games  
Connectivity  
Your phone has several entertaining games.  
You can also download games and applications  
directly to your phone. Help texts are available  
for most games.  
Internet and email settings, synchronizing,  
Bluetooth™ wireless technology, infrared.  
Internet  
To start and end a game  
Setting up Internet and email  
1
} Entertainment } Games and select a game  
} Start.  
In order to use the Internet, and send and receive  
picture and email messages, you need the following:  
2
} More to read help texts. Press  
the game.  
to end  
A phone subscription that supports data  
transmission.  
To download a game  
Settings entered in your phone.  
You may also have to register as an Internet  
and email user with your service provider.  
} Entertainment } Games and scroll to a direct link  
} Go To.  
Entering Internet and email settings  
Settings may already be entered when you buy  
your phone. If not, you can enter the settings  
in three different ways:  
You can receive settings in a text message from  
your service provider. Settings are also available  
You can enter settings by using the setup wizard.  
You can enter or edit settings manually.  
63  
This is the Internet version of the user's guide. © Print only for private use.  
             
Connectivity  
Using Internet  
Some settings are not mandatory. Please consult  
Your phone has a browser that uses WAP  
(Wireless Application Protocol) or HTTP (Hyper  
Text Transfer Protocol) to bring Internet to your  
mobile phone.  
your service provider for more information.  
Receiving settings in a text message  
Your service provider or Internet service provider  
may be able to send the required data account,  
Internet and email settings direct to your phone  
in a text message.  
To select an Internet profile  
} Connect } Internet Settings } Internet Profiles  
and select the profile you want to use.  
Requesting settings from  
Sony Ericsson  
To start browsing  
Scroll to your online service or service provider  
menu and select a service.  
Use a PC to go to www.SonyEricsson.com  
to request that a text message be sent to your  
phone with the settings you need.  
To stop browsing  
} More } Exit Browser.  
Setting up with the wizard  
If your phone is not set up for Internet, you can ask  
your service provider to provide you with Internet  
settings information. Then you can simply use the  
wizard in your phone to help guide you through the  
relevant settings.  
Options when browsing  
} More to view different browsing options.  
The options may vary depending on which site  
you are visiting.  
If you select an email address when browsing a Web  
site, you can send a text message to that address.  
The wizard is automatically turned on if no Internet  
settings exist in your phone and you start the browser.  
64  
This is the Internet version of the user's guide. © Print only for private use.  
       
Connectivity  
The options menu always contains the following:  
Using bookmarks  
You use bookmarks in your mobile phone just as  
you do with a PC Internet browser. You can create  
and edit bookmarks.  
Exit Browser – disconnect and go to standby.  
Go to the homepage set for the current Internet  
profile, for example, Sony Ericsson.  
Bookmarks – add the site you are currently  
browsing to your list of bookmarks or folders,  
or view the list of bookmarks and folders for the  
current profile. Select to stream music or videos.  
Enter Address – enter the Web page address of  
a site you want to visit. } New Address to enter  
a new Web page address or select one of the  
10 most recently entered addreses. When you  
enter a Web page address, the normal http://  
prefix is not needed.  
To work with bookmarks  
1
} Internet Services } More } Bookmarks  
and select a bookmark } More.  
Select an option.  
2
Downloading  
You can download, for example, pictures, themes,  
games and ringtones, from Web sites directly to  
your phone.  
History – list of previously visited sites.  
Refresh Page – refresh the contents of the  
Web page.  
Contact your service provider for more information  
if menu options are not available.  
Save Picture – save a picture from the site.  
Send Link – send a link to the current site  
to another phone.  
Status – display current status information,  
for example, profile, access type, connection  
time, data rate, security, address.  
Make a Call/End Call – if your subscription  
supports it, you can make a call while browsing  
the Internet by selecting Make a Call. } End Call  
to end the call and continue browsing.  
To download from  
wap.sonyericsson.com  
1
2
} Internet Services } More } Bookmarks  
} Sony Ericsson.  
Select what you want to download and follow  
the instructions that appear.  
65  
This is the Internet version of the user's guide. © Print only for private use.  
Connectivity  
Stored information  
Security for a connection between a WAP gateway and  
a WAP service provider is the responsibility of the  
WAP service provider.  
When browsing, you can save information  
in your phone.  
It is advisable to clear any sensitive information about  
previously visited Internet services. This is to avoid  
a security risk if your phone is misplaced, lost or stolen.  
To turn on a secure connection (WAP)  
1
} Connect } Internet Settings } Internet  
Profiles and select a profile } More } Settings.  
Turn on security.  
The following information can be saved:  
2
Cookies – improve site access efficiency.  
Passwords – improve server access efficiency.  
Trusted certificates  
To establish a secure connection when using  
certain Internet services, for example, banking,  
you need certificates in your phone.  
To allow or clear cookies  
in your phone  
} Connect } Internet Settings } Cookies and select  
an option and confirm.  
Trusted certificates are used to verify the WAP  
gateway or the HTTP server that you are trying to  
connect to. Your phone may already contain trusted  
certificates when you buy it. You can also download  
new certificates using the browser.  
To clear the password list  
} Connect } Internet Settings } Clear Passwords  
and } Yes to confirm.  
To check the certificates  
in your phone  
Internet security  
Your phone has support for both WAP and HTTP  
secure browsing. To activate a secure connection  
to the WAP gateway, you need to turn on security  
in your Internet profile. If your Internet profile  
is a HTTP profile, the connection will be secure  
if the URL starts with https://.  
} Connect } Internet Settings } Security  
} Trusted Cert.  
66  
This is the Internet version of the user's guide. © Print only for private use.  
           
Connectivity  
To enter the remote synchronization  
settings  
Synchronizing  
You can synchronize your mobile phone contacts,  
appointments, tasks and notes with similar  
programs in, for example, a PC, PDA or mobile  
phone using Bluetooth wireless technology, the  
infrared port or a cable, and with similar programs  
on the Internet using WAP or HTTP.  
1
} Connect } Synchronization } New Account.  
If you do not have an account, you will be  
asked if you want to create an account.  
} Yes to create a new account.  
2
Enter a name for the new account } Continue.  
A list of options to enter will appear. Add the  
server address of the synchronization server,  
a server username and a server password.  
} OK when you have entered each setting.  
Select New Account and select the WAP  
or HTTP profile that you want to use for the  
synchronization.  
Select Applications and select the applications  
that you want to synchronize, for example,  
Phonebook } OK.  
Select Application Settings and select  
application. Enter the name of the database  
and, if required, your username and password  
} OK.  
To select sync order for names  
} Phonebook } Options } Advanced } Sync. Order  
to select which order first and last name appear  
in the phone when you synchronize contacts.  
3
4
5
Synchronization with nearby devices  
Install the synchronization program from the CD  
that comes with your phone or download it from  
For more information, please refer to the  
synchronization software online help.  
Remote synchronization with  
Internet programs  
Contact your service provider for more information  
about the programs on the Internet with which you  
can synchronize, and to receive username, password  
and addresses for the different programs. You must  
also have a Internet profile set in your mobile  
6
Press  
} Save to save your new account.  
To start the remote synchronization  
} Connect } Synchronization and select a remote  
account } Start.  
67  
This is the Internet version of the user's guide. © Print only for private use.  
       
Connectivity  
You can exchange items, use a remote screen and  
play games without adding the device to the list.  
To synchronize with your PC, and to browse the  
Internet, you also need to install software on your  
PC from the CD that comes with your phone,  
or download it from www.SonyEricsson.com.  
Bluetooth™ wireless  
technology  
Your phone has built-in Bluetooth wireless  
technology which makes it possible for you to  
connect your phone wirelessly to other Bluetooth  
devices such as a handsfree, PC, a remote screen  
or other phones.  
You can, for example, have a conversation via  
a cordless Bluetooth handsfree or browse the  
Internet, wirelessly connected via a mobile phone.  
You can automatically synchronize information in  
your phone and your PC and use the remote control  
functionality to control applications on your PC.  
You can also exchange, for example, business  
cards, calendar items and pictures. To use a remote  
screen, % 56 Remote screen.  
To turn Bluetooth on  
} Connect } Bluetooth } Turn On.  
To add a device to your phone  
1
} Connect } Bluetooth } My Devices  
} New Device. The Bluetooth function of the  
other device must also be on.  
2
} Add and your phone will search for all types  
of available Bluetooth devices. } More if you  
want to select a specific type of device to  
search for.  
We recommend that your phone and the Bluetooth  
device you are communicating with be within a range  
of 10 meters. The connection may be improved if there  
are no solid objects in between your phone and the  
other Bluetooth device.  
3
4
The phone searches for Bluetooth devices.  
A list of available devices of the type you  
selected is then displayed. Select a device.  
If the device you are adding to your phone has  
its own passcode, enter this passcode in your  
phone. If not, create a passcode of digits  
yourself and enter it in both devices.  
Before you start  
To communicate with another Bluetooth device,  
you first need to turn Bluetooth on and add the  
device to the list of devices in your phone.  
68  
This is the Internet version of the user's guide. © Print only for private use.  
       
Connectivity  
To organize your list of devices  
To add a Bluetooth handsfree  
to your phone  
1
} Connect } Bluetooth } My Devices and select  
a device from the list.  
1
} Connect } Bluetooth } Handsfree.  
The first time you add a handsfree,  
Add a handsfree device to use with the phone?  
is displayed } Yes.  
2
} More to view a list of options.  
Phone name  
You can choose a name for your phone. This name  
is shown in other devices when your phone is found,  
and it is also used for the infrared port. In order for  
your phone to be found when searched for by other  
Bluetooth devices, you must make sure that  
Bluetooth is turned on and your phone is visible  
to other devices.  
2
If you already have a handsfree in your list of  
devices } Connect } Bluetooth } Handsfree  
} My Handsfree } New Handsfree } Add.  
Transferring sound  
When you are using a Bluetooth handsfree with  
your phone, you can choose where the sound  
should be transferred during a call. You can also  
select where the sound should be handled when  
answering an incoming call with the keypad.  
To enter a phone name  
} Connect } Bluetooth } Options } Edit Phone  
Name. When Bluetooth is turned on, the name  
is shown in other devices and your phone is visible  
to other devices.  
To transfer sound when using  
a handsfree  
1
During a call, press the navigation key  
} Transfer Sound.  
To hide or show your phone when  
using Bluetooth  
2
Select to transfer sound either to the phone  
or to other handsfree devices that have been  
added to your phone.  
} Connect } Bluetooth } Options } Visibility and  
select Show Phone or Hide Phone.  
69  
This is the Internet version of the user's guide. © Print only for private use.  
 
Connectivity  
To direct sound when answering  
To receive an item  
a call with a handsfree  
1
2
} Connect } Bluetooth } Turn On.  
} Connect } Bluetooth } Handsfree } Incoming Call  
and select Place in Phone or Place in H-free.  
Make sure that your phone is visible to other  
devices. When you receive the item, follow the  
instructions that appear on the screen.  
Sending and receiving  
To send or receive an item, for example, a contact  
from the phonebook or a picture taken with the  
camera, using Bluetooth wireless technology,  
you need to make sure that the devices are  
within range.  
Remote control  
You can use your phone as a remote control device  
to control applications on a PC. For example,  
you can control a media player or power point  
presentations.  
After you select Bluetooth as the transfer method  
for sending, a list of possible receiving devices  
is presented. First in the list will be the last device  
you were in contact with and devices that have  
been previously added to your phone. The phone  
also searches for other devices that are shown  
in the list.  
To select remote control  
} Connect } Bluetooth } Remote Control. Select  
the configuration file you want to use and the PC  
you want to connect to.  
File transfer  
You can use a PC to view and transfer content  
contained in the File Manager. You can use the  
drag-and-drop functionality in your PC to:  
To send an item  
1
Select the item that you want to send,  
for example, a phonebook contact  
Transfer files from the phone to the PC.  
Transfer files from the PC to the phone.  
Delete files from the phone.  
} Phonebook and select a contact  
} More } Send Contact } Via Bluetooth.  
The phone searches for devices. Select the  
device you want to send the item to } Send.  
2
70  
This is the Internet version of the user's guide. © Print only for private use.  
 
Connectivity  
File browsing  
To turn the infrared port on  
You can browse and retrieve the files contained  
in other devices that support the server role of the  
file transfer profile. To do this, you must first add  
the other device to your list of My Devices.  
} Connect } Infrared Port } On } 10 Minutes to turn  
on infrared for 10 minutes only.  
To connect two devices  
To check whether the device has support for this  
specific functionality, please refer to the list of  
Bluetooth services available in the other device.  
To browse files  
1
2
} Connect } Bluetooth } My Devices.  
Select a device } Browse.  
Infrared port  
You can use the infrared port to establish contact  
between your phone and a PC or another device  
equipped with an infrared port. You can,  
for example, synchronize calendar items,  
% 67 Synchronizing, and send items such  
as pictures and contacts.  
1
2
Position your phone as shown in the picture.  
The infrared port on the phone must face the  
infrared port on the other device.  
Your phone now establishes contact with the  
other device.  
To send an item using the infrared  
port (example: a contact)  
If you are connecting to a PC, please refer to the user  
documentation for your PC.  
1
Make sure that the infrared port of both devices  
is on. } Phonebook and select a contact,  
when contacts is default phonebook.  
2
} More } Send Contact } Via Infrared.  
71  
This is the Internet version of the user's guide. © Print only for private use.  
   
More features  
Alarm clock  
More features  
The alarm can be set to ring at a specific time  
within 24 hours, or recurrently at a specific time  
on several days. You can have both these alarms  
set at the same time. The alarm signal rings even  
if the phone is set to silent or turned off.  
Time and date, alarm clock, calendar, tasks,  
SIM card lock, etc.  
Time and date  
The time is always displayed in standby.  
To set an alarm  
To set the time } Settings } the General tab  
} Time & Date } Time. Enter the time } Save.  
To set the time format (12-hour or 24-hour  
clock) } Format and select an option.  
} Organizer } Alarm Signal } Alarm and enter the  
time } Save.  
Using the alarm  
To change the alarm time, } Organizer  
} Alarm Signal } Alarm and enter a new time.  
To turn the alarm signal off when it rings,  
press any key. If you do not want the alarm  
to be repeated } Turn Off.  
Date  
You can set the date and date format in Settings  
} the General tab } Time & Date } Date.  
Advanced time settings  
To cancel the alarm } Organizer } Alarm Signal  
} Alarm } Turn Off.  
To set a recurrent alarm } Organizer  
} Alarm Signal } Recurrent Alarm. Enter the time  
and select the days that you want the alarm to  
recur by scrolling and pressing Mark. } Done  
to exit the menu.  
In Settings } the General tab } Time & Date you  
can set time zone and daylight saving time.  
If you have activated Auto Time Zone, you are  
asked whether you want to update the time when  
your phone changes network. If you press Yes,  
the time is updated automatically.  
To select an alarm signal } Organizer  
} Alarm Signal } Alarm Signal.  
72  
This is the Internet version of the user's guide. © Print only for private use.  
       
More features  
Reminders options  
Calendar  
} Always if you want the reminder to sound even  
though the phone is turned off. When the reminder  
sounds } Yes to read the appointment. } No to turn  
off the reminder.  
You can use the calendar to keep track of important  
meetings that you need to attend. The calendar can  
be synchronized with a PC calendar or with  
a calendar on the Web % 67 Synchronizing.  
A reminder set in the calendar affects a reminder set  
for the same time in tasks.  
Appointments  
You can save up to 300 appointments depending  
on the size of each item. You can choose to add  
a new appointment or use an old one as a template  
by copying and editing it. You can also set  
a reminder for an appointment.  
To view an appointment  
1
Organizer } Calendar and select a day on which  
you have an appointment (marked in bold).  
Scroll to the appointment } View.  
2
To add a new appointment  
Viewing your calendar  
1
} Organizer } Calendar and select the date for  
the appointment } New Appointment } Add.  
Enter date, subject, location and reminder.  
Confirm each entry.  
To view your calendar content } Organizer  
} Calendar. Days on which you have appointments  
are marked in bold. } More } View Week to view  
a certain week.  
2
To set reminders options  
} Organizer } Calendar } More } Advanced  
} Reminders.  
73  
This is the Internet version of the user's guide. © Print only for private use.  
   
More features  
Navigating in your calendar  
To search for appointments  
Use the navigation key to move between days or  
weeks. In the monthly and weekly views, you can  
also use the keypad as follows.  
1
} Organizer } Calendar } More } Advanced  
} Find.  
2
Enter the text you want to search for } OK.  
Appointments that match your search are shown.  
} View to view your appointments or } More  
for options to reschedule, edit, send, copy  
or delete.  
Back a week  
Back a month  
Back a year  
Todays date  
Next week  
Next month  
Next year  
Exchanging appointments  
You can send and receive appointments using  
Bluetooth wireless technology, the infrared port  
or picture messaging.  
Calendar settings  
} Organizer } Calendar } More and select one  
of the options:  
View Week – select, add, edit or delete  
appointments.  
New Appointment – add a new appointment.  
Change Date – change the date of your calendar.  
Advanced – for options to find, delete all, set  
reminders or select a start day for the week.  
To send an appointment  
In the list of appointments for a certain day, select  
the item you want to send } More } Send and select  
a transfer method.  
Receiving an appointment  
When Add appointment? is displayed } Yes to save  
the appointment.  
Find an appointment  
You can search for appointments that contain  
a specific text.  
74  
This is the Internet version of the user's guide. © Print only for private use.  
     
More features  
Tasks  
A reminder set in tasks affects a reminder set for the  
same time in the calendar.  
You can keep track of phone calls you need to make  
or tasks that you need to do. You can save up to  
80 tasks depending on the size of each item.  
You can choose to add a new task or use an old  
one as a template by copying and editing it.  
You can also set a reminder for a task.  
To view a task  
} Organizer } Tasks and select a task } View.  
Exchanging tasks  
You can send and receive tasks using Bluetooth  
wireless technology, the infrared port or picture  
messaging.  
To add a new task  
1
2
} Organizer } Tasks } New Task } Add.  
Select a category. If the category is a phone  
call, enter the phone number } Continue.  
Enter a subject } Continue.  
If you want to set a reminder for your task  
} Yes.  
To send a task  
1
In the list of tasks for a certain day, select  
the item you want to send } More } Send.  
Select a transfer method.  
3
4
2
Receiving a task  
To set reminders  
When Add task? is displayed } Yes to save the  
appointment or task.  
} Organizer } Tasks and select a task } More  
} Reminders.  
Reminders options  
Notes  
} Always if you want the reminder to sound even  
though the phone is turned off. When the reminder  
sounds press Yes to read the task, or to call the  
phone number in a phone task. } No to turn off  
the reminder.  
If you need to remember something, you can make  
a note of it in your phone. You can save up  
to 10 notes.  
75  
This is the Internet version of the user's guide. © Print only for private use.  
     
More features  
To add a note  
Profiles  
} Organizer } Notes } New Note } Add and enter  
the note } Save.  
Your phone has a number of predefined profiles  
which are set to suit a certain environment. You can  
add accessories to, rename or change these profiles.  
For example, when you go to a meeting, you can  
simply choose the Meeting profile and a number  
of settings are changed, for example, the ringtone  
is turned off.  
To handle the notes  
1
2
} Organizer } Notes and a list of notes appears.  
Select the note that you want to handle. } More  
to edit, show a note in standby (or hide it),  
send or delete a note.  
You can reset all profile settings to the way they  
were set when you bought your phone.  
Exchanging notes  
You can send and receive notes using Bluetooth  
wireless technology, the infrared port or picture  
messaging. You can also synchronize notes with  
Automatic activation  
Some profiles, for example In Car,  
are automatically activated when used with  
a specific accessory. When the accessory  
is disconnected, the profile is changed back.  
To send a note  
} Organizer } Notes and select the note that you  
want to send } More } Send and select a transfer  
method.  
To select a profile  
} Settings } the General tab } Profiles  
} Select Profile.  
To receive a note  
To change a profile setting  
Add note? appears } Yes to save the note among  
your other notes.  
1
} Settings } the General tab } Profiles  
} Edit Profile and select a setting.  
2
Change the profile settings } Save to confirm.  
76  
This is the Internet version of the user's guide. © Print only for private use.  
       
More features  
To rename a profile  
Display light  
} Settings } the General tab } Profiles } Edit Profile  
} Profile Name:.  
The display light can be set to automatic, off or on.  
In automatic mode, the display light is turned off  
a few seconds after you last press a key.  
To reset all profile settings  
} Settings } the General tab } Profiles  
} Reset Profiles.  
To set the display light  
} Settings } the Display tab } Light.  
Start-up screen  
Stopwatch  
When you turn your phone on or off,  
Your phone has a stopwatch that can save several  
laps. The stopwatch continues to run when you  
answer an incoming call.  
the Sony Ericsson start-up screen appears. Your  
service provider’s own start-up screen may appear  
instead. You can also set your own start-up screen.  
To use the stopwatch  
To select a start-up screen  
} Settings } the Display tab } Startup Screen and  
select a file for the start-up screen.  
1
2
3
} Organizer } Stopwatch } Start.  
} Stop or } New Lap if you want a lap time.  
To reset the stopwatch } Reset.  
Calculator  
Timer  
The phone has a calculator, which can add,  
subtract, divide and multiply.  
Your phone has a built-in timer. When the signal  
rings, press any key to turn it off.  
To use the calculator  
To set the timer  
} Organizer }Calculator.  
} Organizer } Timer and enter the hours, minutes  
and seconds after which you want the timer  
to go off.  
Press  
Press  
Press  
or  
to select ÷ x - + % =.  
to delete the figure.  
to enter a decimal point.  
77  
This is the Internet version of the user's guide. © Print only for private use.  
       
More features  
To edit your PIN  
SIM card lock  
} Settings } the General tab } Locks } SIM Lock  
} Change PIN.  
The SIM card lock protects your subscription,  
but not your phone itself, from unauthorized use.  
If you change SIM cards, the phone still works  
with the new SIM card.  
To turn the SIM card lock on or off  
1
} Settings } the General tab } Locks } SIM  
Lock } Protection and select On or Off.  
Enter your PIN } OK.  
Most SIM cards are locked at the time of purchase.  
If the SIM card lock is on, you have to enter a PIN  
(Personal Identity Number) every time you turn  
on your phone.  
2
If you enter your PIN incorrectly three times  
in a row, the SIM card is blocked. This is indicated  
by the message PIN blocked. To unblock it you  
need to enter your PUK (Personal Unblocking  
Key). Your PIN and PUK are supplied by your  
service provider.  
Keypad lock  
You can lock the keypad to avoid dialing a number  
by accident.  
Calls to the international emergency number 112 can  
still be made, even when the keypad is locked.  
If the message Codes do not match. appears, you entered  
the new PIN incorrectly. If the message Wrong PIN.  
appears, followed by Old PIN:, you entered your old  
PIN incorrectly.  
Automatic keylock  
Automatic keylock means the keypad is locked  
a short while after you last press a key.  
To set the automatic keylock  
} Settings } the General tab } Locks  
} Automatic Keylock.  
To unblock your SIM card  
1
When PIN blocked. is displayed, enter your  
PUK } OK.  
2
3
Enter a new four- to eight-digit PIN } OK.  
Re-enter the new PIN to confirm } OK.  
To lock the keypad manually  
Press  
} Lock Keys.  
78  
This is the Internet version of the user's guide. © Print only for private use.  
           
More features  
You can still answer an incoming call and the  
keypad locks again after it. The keypad remains  
locked until you unlock it manually.  
To set the phone lock  
1
} Settings } the General tab } Locks  
} Phonelock } Protection and select  
an alternative.  
To unlock the keypad, press  
} Unlock.  
2
Enter the phone lock code } OK.  
Phone lock  
To edit your phone lock code  
} Settings } the General tab } Locks } Phonelock  
} Change Code.  
The phone lock protects the phone against  
unauthorized use if it is stolen and the SIM card  
is exchanged. It is not on when you buy the phone.  
You can change the phone lock code (0000) to any  
four- to eight-digit personal code.  
Code memo  
Instead of having to remember all the different  
security codes for credit cards, for example,  
you can save them in the code memo in your  
phone. Then all you need to remember is the  
passcode to open the code memo. You can save  
a maximum of 10 codes in the code memo.  
Phone lock on  
If the phone lock is on, the message Phone locked.  
appears each time you turn on the phone. You have  
to enter your code followed by Yes to use  
your phone.  
Automatic phone lock  
Checkword and security  
If the phone lock is set to automatic, you do not  
need to enter your phone lock code until a different  
SIM card is inserted in the phone.  
To confirm that you have entered the correct  
passcode for the code memo and to prevent  
unauthorized access to your codes, you must  
enter a checkword.  
It is important that you remember your new code.  
If you should forget it, you will need to bring your  
phone in to your local Sony Ericsson retailer.  
79  
This is the Internet version of the user's guide. © Print only for private use.  
         
More features  
When you enter your passcode to open the code  
To add a new code  
memo, the checkword is shown for a short time.  
If the passcode is correct, the correct codes are  
shown. If you enter the incorrect passcode,  
the checkword and the codes that are shown are  
also incorrect.  
1
} Organizer } Code Memo and enter your  
passcode } New Code } Add.  
2
Enter a name associated with the code,  
for example, the name of the credit card  
company } Continue.  
Factors strengthening the security of the code  
memo function are:  
3
Enter the code } Done.  
You get no feedback about whether the passcode  
is correct, except for the checkword, and only  
you know the checkword.  
All codes are encrypted in the phone.  
When you access your codes, they are shown for  
a limited time only.  
To change the passcode  
1
Open code memo as described above } More  
} Change Passcode.  
2
3
4
Enter your new passcode } Continue.  
Re-enter the new passcode } Continue.  
Enter a checkword } Done.  
To open code memo for the first time  
Forgot your passcode?  
1
} Organizer } Code Memo. A message with  
instructions is displayed } Continue.  
Enter a four-digit passcode to open code memo  
} Continue.  
Re-enter the new passcode to confirm.  
Enter a checkword (maximum 15 characters)  
} Done. The checkword can consist of both  
letters and numbers. The next time you open  
the code memo, your checkword appears after  
you enter the passcode, and then your added  
codes are shown.  
If you forget your passcode, just enter any passcode  
to access the code memo function. The checkword  
and codes that are then shown are incorrect.  
You must now reset the code memo.  
2
3
4
80  
This is the Internet version of the user's guide. © Print only for private use.  
 
Troubleshooting  
To reset code memo  
Troubleshooting  
1
2
} More } Reset.  
Why doesn’t the phone work the way I want?  
Reset code memo? is displayed } Yes.  
The code memo is reset and all entries are  
cleared. The next time you enter the code  
memo, you must start at % 80 To open code  
This chapter lists some problems that you might  
encounter while using your phone. Some problems  
require that you call your service provider,  
but most of the problems you can easily correct  
yourself.  
However, if you need to bring your phone in for  
repair, please note that you may lose information  
and content that you have saved in your phone.  
You are advised to make a copy of such information  
before bringing your phone in for repair.  
Online services  
Online services are customized services offered  
by service providers independently of mobile  
phones and mobile phone manufacturers.  
A SIM card which supports online services  
works in the same way as a normal SIM card.  
When you have inserted your SIM card and turned  
on your phone, your service provider can download  
data to your SIM card. When you restart your  
phone after the first data download, a new submenu  
appears under the menu.  
Master reset  
You can return the phone to its original state by  
deleting the changes that you have made to settings  
and the content that you have added or edited.  
If you select Reset Settings, the changes that  
you have made to settings will be deleted.  
If you select Reset All, in addition to your  
changes to settings, all contacts, messages,  
personal data, and content that you have  
downloaded, received or edited will also  
be deleted.  
This menu only appears if your SIM card supports  
this service. Your phone may not support all of the  
services offered.  
To enter your new menu system  
Select the service provider menu on the desktop.  
81  
This is the Internet version of the user's guide. © Print only for private use.  
       
Troubleshooting  
To reset the phone  
Grey menu options  
1
2
3
} Settings } the General tab } Master Reset.  
Grey text indicates a function that is temporarily  
unavailable, for example, if a service is not activated,  
or if your subscription does not support the function.  
Since you cannot send themes, pictures and sounds  
that are copyright-protected, the Send menu is  
sometimes unavailable.  
} Reset Settings } Reset All.  
Enter the phone lock code (0000 or the new  
code if you have changed it) } OK.  
If you select Reset All, content such as melodies and  
pictures that you have downloaded, received or edited  
are also deleted.  
Insert SIM  
There is no SIM card in the phone or you may  
have inserted it incorrectly. Insert a SIM card.  
The phone cannot be switched on  
Recharge or replace the battery. % 5 To insert the  
Insert correct SIM card  
No indication of charging  
The phone is set to work only with certain  
SIM cards. Insert the correct SIM card.  
When you start charging a battery that is empty  
or a battery that has not been used for a long time,  
it may take up to 30 minutes before the battery icon  
appears in the display.  
SOS calls only  
You are within range of a network, but you are not  
allowed to use it. However, in an emergency, some  
service providers allow you to call the international  
emergency number 112. % 19 Emergency calls.  
Menu language  
If the display shows a language that you do not  
understand, you can always choose Automatic  
(determined by your SIM card) by pressing  
No network  
8888  
English by pressing  
in standby. You can always choose  
0000 in standby.  
There is no network within range or the received  
signal is too weak. You have to move to get a signal  
that is strong enough.  
82  
This is the Internet version of the user's guide. © Print only for private use.  
 
Troubleshooting  
Wrong PIN/Wrong PIN2  
Phone lock code  
You have entered your PIN or PIN2 incorrectly.  
Enter the correct PIN or PIN2 } Yes.  
Your phone comes with the phone lock code, 0000.  
You can change it to any four- to eight-digit code.  
Codes do not match  
Number not permitted  
When you want to change a security code (for  
example your PIN) you have to confirm the new  
code by entering it again. The two codes that you  
have entered do not match. % 78 SIM card lock.  
The fixed dialing function is activated and the  
number you have dialed is not on your fixed  
numbers list. % 31 Fixed dialing.  
Charging, alien battery  
PIN blocked/PIN2 blocked  
You have entered your PIN or PIN2 incorrectly  
three times in a row. To unblock,  
The battery you are using is not a Sony Ericsson-  
approved battery, % 87 Battery use and care.  
PUK blocked  
You entered your personal unblocking key code  
(PUK) incorrectly 10 times in a row. Contact your  
service provider.  
Phone locked  
The phone is locked. To unlock the phone,  
83  
This is the Internet version of the user's guide. © Print only for private use.  
     
Additional information  
Do not expose your product to open  
flames or lit tobacco products.  
Do not drop, throw or try to bend  
your product.  
Do not paint your product.  
Do not use your product near medical equipment  
Additional information  
Sony Ericsson Web site, safe and efficient use,  
warranty, declaration of conformity.  
Sony Ericsson Consumer Web site  
At www.SonyEricsson.com there is a support  
section where help and tips are only a few clicks  
away. Here you find the latest software updates,  
tips on how to use your product more efficiently,  
and function guides for some of the products.  
without requesting permission.  
Do not use your product when in, or around aircraft,  
or areas posted “turn off two-way radio”.  
Do not use your product in an area where a  
potentially explosive atmosphere exists.  
Do not place your product or install wireless  
equipment in the area above your car’s air bag.  
Do not attempt to disassemble your  
Guidelines for Safe and  
Efficient Use  
product. Only Sony Ericsson-authorized  
personnel should perform service.  
Please read this information before using  
your mobile phone.  
Antenna  
Only use an antenna that has been specifically  
designed by Sony Ericsson for your mobile phone.  
Use of unauthorized or modified antennas could  
damage your mobile phone and may violate  
Recommendations  
Always treat your product with care  
and keep it in a clean and dust-free place.  
Do not expose your product to liquid  
or moisture or humidity.  
Do not expose your product to  
extreme high or low temperatures.  
regulations, causing loss of performance and SAR  
levels above the recommended limits (see below).  
84  
This is the Internet version of the user's guide. © Print only for private use.  
       
Additional information  
actual SAR level of the mobile phone while operating  
can be well below this value. This is because the  
mobile phone is designed to use the minimum power  
required to reach the network.  
Efficient use  
Hold your mobile phone as you would any other  
phone. Do not cover the top of the phone when  
in use, as this affects call quality and may cause  
the phone to operate at a higher power level than  
needed, thus shortening talk and standby times.  
Variations in SAR below the radio frequency exposure  
guidelines do not mean that there are variations in  
safety. While there may be differences in SAR levels  
among mobile phones, all Sony Ericsson mobile  
phone models are designed to meet radio frequency  
exposure guidelines.  
Radio frequency (RF) exposure  
and SAR  
Your mobile phone is a low-power radio transmitter  
and receiver. When it is turned on, it emits low levels  
of radio frequency energy (also known as radio waves  
or radio frequency fields).  
Before a phone model is available for sale to the public,  
it must be tested and certified to the FCC that it does  
not exceed the limit established by the government-  
adopted requirement for safe exposure. The tests are  
performed in positions and locations (that is, at the ear  
and worn on the body) as required by the FCC for  
each model. For body worn operation, this phone has  
been tested and meets FCC RF exposure guidelines  
when the handset is positioned a minimum of 15 mm  
from the body without any metal parts in the vicinity of  
the phone or when used with the original Sony Ericsson  
body worn accessory intended for this phone. Use of  
other accessories may not ensure compliance with  
FCC RF exposure guidelines.  
Governments around the world have adopted  
comprehensive international safety guidelines,  
developed by scientific organizations, e.g. ICNIRP  
(International Commission on Non-Ionizing Radiation  
Protection) and IEEE (The Institute of Electrical and  
Electronics Engineers Inc.) through periodic and  
thorough evaluation of scientific studies. These  
guidelines establish permitted levels of radio wave  
exposure for the general population. The levels include  
a safety margin designed to assure the safety of all  
persons, regardless of age and health, and to  
account for any variations in measurements.  
A separate leaflet with SAR information for this mobile  
phone model is included with the material that comes  
with this mobile phone. This information can also be  
found, together with more information on radio  
frequency exposure and SAR,  
Specific Absorption Rate (SAR) is the unit of  
measurement for the amount of radio frequency  
energy absorbed by the body when using a mobile  
phone. The SAR value is determined at the highest  
certified power level in laboratory conditions, but the  
85  
This is the Internet version of the user's guide. © Print only for private use.  
Additional information  
Driving  
CHILDREN  
Please check if local laws and regulations restrict the  
use of mobile phones while driving or require drivers  
to use handsfree solutions. We recommend that you  
use only Ericsson or Sony Ericsson handsfree  
solutions intended for use with your product. Please  
note that because of possible interference to  
electronic equipment, some vehicle manufacturers  
forbid the use of mobile phones in their vehicles  
unless a handsfree kit with an external antenna  
supports the installation.  
DO NOT ALLOW CHILDREN TO PLAY  
WITH YOUR MOBILE PHONE OR ITS  
ACCESSORIES. THEY COULD HURT  
THEMSELVES OR OTHERS, OR COULD  
ACCIDENTALLY DAMAGE THE MOBILE PHONE  
OR ACCESSORY. YOUR MOBILE PHONE OR ITS  
ACCESSORY MAY CONTAIN SMALL PARTS THAT  
COULD BE DETACHED AND CREATE A CHOKING  
HAZARD.  
Disposing of the product  
Always give full attention to driving and pull off the  
road and park before making or answering a call  
if driving conditions so require.  
Your mobile phone should not be placed  
in municipal waste. Please check local  
regulations for disposal of electronic  
products.  
Personal medical devices  
Mobile phones may affect the operation of cardiac  
pacemakers and other implanted equipment. Please  
avoid placing the mobile phone over the pacemaker,  
e.g. in your breast pocket. When using the mobile  
phone, place it at the ear opposite the pacemaker.  
If a minimum distance of 15 cm (6 inches) is kept  
between the mobile phone and the pacemaker,  
the risk of interference is limited. If you have any  
reason to suspect that interference is taking place,  
immediately turn off your mobile phone. Contact your  
cardiologist for more information.  
Power supply  
Connect the AC power adapter only to designated  
power sources as marked on the product. Make sure  
the cord is positioned so that it will not be subjected  
to damage or stress. To reduce risk of electric shock,  
unplug the unit from any power source before  
attempting to clean it. The AC power adapter must  
not be used outdoors or in damp areas. Never alter  
the cord or plug. If the plug will not fit into the outlet,  
have a proper outlet installed by a qualified  
electrician.  
For other medical devices, please consult the  
manufacturer of the device.  
86  
This is the Internet version of the user's guide. © Print only for private use.  
Additional information  
produce excessive heat. Using other batteries and  
chargers could be dangerous.  
Emergency calls  
Mobile phones operate using radio signals, which  
cannot guarantee connection under all conditions.  
Therefore you should never rely solely upon any  
mobile phone for essential communications  
(e.g. medical emergencies).  
Do not expose the battery to liquid.  
Do not let the metal contacts on the battery touch  
another metal object. This could short-circuit and  
damage the battery.  
Do not disassemble or modify the battery.  
Do not expose the battery to extreme  
Emergency calls may not be possible on all cellular  
networks or when certain network services and/or  
mobile phone features are in use. Check with your  
local service provider.  
temperatures, never above +60°C  
(+140°F). For maximum battery capacity,  
use the battery in room temperature.  
Turn off your mobile phone before  
Battery use and care  
removing the battery.  
We recommend that you fully charge the battery  
before you use your mobile phone for the first time.  
The battery should only be charged in temperatures  
between +5°C (+41°F) and +45°C (+113°F).  
Keep out of children’s reach.  
Use the battery for the intended  
purpose only.  
Do not allow the battery to be put into  
A new battery or one that has not been used for  
a long time could have reduced capacity the first  
few times it is used.  
the mouth. Battery electrolytes may be  
toxic if swallowed.  
Disposing of the battery  
The talk and standby times depend on the actual  
transmission conditions when using the mobile  
phone. If the mobile phone is used near a base  
station, less power is required and talk and standby  
times are prolonged.  
Please check local regulations for  
disposal of batteries or call your local  
Sony Ericsson Customer Care Center  
for information.  
Warning! May explode if disposed of in fire.  
Use only Sony Ericsson branded original batteries  
The battery should never be placed in municipal  
waste. Use a battery disposal facility if available.  
and chargers intended for use with your mobile phone.  
Other chargers may not charge sufficiently or may  
87  
This is the Internet version of the user's guide. © Print only for private use.  
   
Additional information  
Sony Ericsson and its service partners reserve the  
right to charge a handling fee if a returned Product  
is found not to be under warranty according to the  
conditions below.  
Limited Warranty  
Sony Ericsson Mobile Communications AB, S-221 88  
Lund, Sweden, (Sony Ericsson), provides this Limited  
Warranty for your mobile phone and original accessory  
delivered with your mobile phone (hereinafter  
referred to as “Product”).  
Please note that your personal settings/downloads  
might be lost when the Product is repaired or replaced.  
Should your Product need warranty service, please  
return it to the dealer from whom it was purchased,  
or contact your local Sony Ericsson Customer  
Care Center (national rates may apply) or visit  
www.SonyEricsson.com to get further information.  
Conditions  
1 The warranty is valid only if the original proof of  
purchase issued to the original purchaser by an,  
for this Product, Sony Ericsson authorized dealer,  
specifying the date of purchase and serial number**,  
is presented with the Product to be repaired  
or replaced. Sony Ericsson reserves the right  
to refuse warranty service if this information  
has been removed or changed after the original  
purchase of the Product from the dealer.  
Our warranty  
Subject to the conditions of this Limited Warranty,  
Sony Ericsson warrants this Product to be free from  
defects in design, material and workmanship at the  
time of its original purchase by a consumer, and for  
a subsequent period of one (1) year.  
2 If Sony Ericsson repairs or replaces the Product,  
the repaired or replaced Product shall be  
warranted for the remaining time of the original  
warranty period or for ninety (90) days from the  
date of repair, whichever is longer. Repair or  
replacement may involve the use of functionally  
equivalent reconditioned units. Replaced parts  
or components will become the property  
of Sony Ericsson.  
What we will do  
If, during the warranty period, this Product fails to  
operate under normal use and service, due to defects  
in design, materials or workmanship, Sony Ericsson  
authorized distributors or service partners, in the  
country/region* where you purchased the Product,  
will, at their option, either repair or replace the  
Product in accordance with the terms and conditions  
stipulated herein.  
3 This warranty does not cover any failure of the  
Product due to normal wear and tear, or due to  
misuse, including but not limited to use in other  
88  
This is the Internet version of the user's guide. © Print only for private use.  
 
Additional information  
THERE ARE NO EXPRESS WARRANTIES,  
than the normal and customary manner,  
in accordance with the Sony Ericsson instructions  
for use and maintenance of the Product. Nor does  
this warranty cover any failure of the Product due  
to accident, software or hardware modification or  
adjustment, acts of God or damage resulting from  
liquid. A rechargeable battery can be charged and  
discharged hundreds of times. However, it will  
eventually wear out – this is not a defect. When  
the talk-time or standby time is noticeably shorter,  
it is time to replace your battery. Sony Ericsson  
recommends that you use only batteries and  
chargers approved by Sony Ericsson.  
WHETHER WRITTEN OR ORAL, OTHER THAN  
THIS PRINTED LIMITED WARRANTY. ALL  
IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE, ARE LIMITED TO  
THE DURATION OF THIS LIMITED WARRANTY.  
IN NO EVENT SHALL SONY ERICSSON OR ITS  
LICENSORS BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY NATURE  
WHATSOEVER, INCLUDING BUT NOT LIMITED  
TO LOST PROFITS OR COMMERCIAL LOSS;  
TO THE FULL EXTENT THOSE DAMAGES CAN  
BE DISCLAIMED BY LAW.  
4 Since the cellular system on which the Product  
is to operate is provided by a carrier independent  
from Sony Ericsson, Sony Ericsson will not be  
responsible for the operation, availability,  
Some countries/states do not allow the exclusion  
or limitation of incidental or consequential damages,  
or limitation of the duration of implied warranties,  
so the preceding limitations or exclusions may not  
apply to you.  
coverage, services or range of that system.  
5 This warranty does not cover Product failures  
caused by installations, modifications, or repair  
or opening of the Product performed by a non-  
Sony Ericsson authorized person.  
6 The warranty does not cover Product failures  
which have been caused by use of accessories  
or other peripheral devices which are not Ericsson  
or Sony Ericsson branded original accessories  
intended for use with the Product.  
The warranty provided does not affect the consumer’s  
statutory rights under applicable legislation in force,  
nor the consumer’s rights against the dealer arising  
from their sales / purchase contract.  
*EUROPEAN UNION (EU)  
If you have purchased your Product in an EU country  
you can have your Product serviced, under the  
conditions set out above, within the warranty period  
in any EU country where an identical Product is sold  
7 Tampering with any of the seals on the Product  
will void the warranty.  
89  
This is the Internet version of the user's guide. © Print only for private use.  
Additional information  
by an authorized Sony Ericsson distributor. To find  
out if your Product is sold in the EU country you are  
in, please call the local Sony Ericsson Customer  
Care Center. Please observe that certain services  
may not be possible elsewhere than in the country  
of original purchase, for example due to the fact that  
your Product may have an interior or exterior which  
is different from equivalent models sold in other EU  
countries. It may not be possible to repair SIM-locked  
Products.  
Declaration of Conformity  
We, Sony Ericsson Mobile Communications AB of  
Nya Vattentornet  
S-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony Ericsson type AAB-1021041-BV  
and in combination with our accessories, to which  
this declaration relates is in conformity with the  
appropriate standards 3GPP TS 51.010-1, NATWG03,  
EN 301489-7, EN 300328, EN 301489-17 and  
EN 60950, following the provisions of, Radio  
Equipment and Telecommunication Terminal  
Equipment directive 99/5/EC with requirements  
covering EMC directive 89/336/EEC, and Low  
Voltage directive 73/23/EEC.  
** In some countries/regions additional information  
is requested. If so, this is clearly shown on the valid  
proof of purchase.  
FCC Statement  
This device complies with Part 15 of the  
FCC rules. Operation is subject to the  
following two conditions: (1) This device may not  
cause harmful interference, and (2) This device  
must accept any interference received, including  
interference that may cause undesired operation.  
Lund, March 2004  
0682  
Hiroshi Yoshioka, Head of Product Business Unit  
GSM/UMTS  
We fulfill the requirements of the R&TTE Directive  
(99/5/EC).  
90  
This is the Internet version of the user's guide. © Print only for private use.  
 
Icons  
Icons  
Icon Description  
Service provider services  
Icon descriptions.  
The table below describes the icons which appear  
on the desktop and in standby.  
Games, MusicDJ™, sound recorder  
Audio and video player, streaming  
FM Radio  
Icon Description  
Desktop  
Standby  
Your personal phonebook  
Desktop icon  
Handling of text, picture, email, instant and  
voice messages  
Tells you the strength of the GSM network  
signal  
Camera and video recorder functions  
GPRS is within range  
Handling of pictures, sounds, video and  
themes  
GPRS is within range and can be used  
Tells you are in a premium charge zone  
Tells you the status of the battery  
You cannot receive any incoming calls  
You have missed an incoming call  
Personal settings, including display, time and  
date, language, sounds, alerts and specific  
settings for calls  
Gives you access to Internet services  
Calendar, alarm clock and other extras  
Settings for Bluetooth, infrared, networks,  
Internet, streaming, accessories  
91  
This is the Internet version of the user's guide. © Print only for private use.  
     
Icons  
Icon Description  
All incoming calls are forwarded  
Icon Description  
The infrared port is on  
to a defined number  
No calls or only certain calls from numbers  
in a list are received  
All signals are off, except the alarm  
and timer  
Infrared communication is in progress  
Bluetooth is on  
A GPRS session is in progress  
Line 1 is in use for outgoing calls  
Line 2 is in use for outgoing calls  
The alarm clock has been set and is on  
The timer has been set and is on  
A profile other than Normal has been chosen  
Ciphering is currently not being provided  
by the network  
The card lock or phone lock is on  
A secure Internet connection is established  
An ongoing call  
You have received a text message  
You have received an email message  
You have received a picture message  
You have received a voice message  
You have received a WAP push message  
A chat session is in progress  
My Friends status icon  
The media player is running  
Data is being downloaded to the phone  
A Java™ application is running  
You have received a message via cell  
broadcast  
92  
This is the Internet version of the user's guide. © Print only for private use.  

Toshiba 25 Inch HDD MK2060GSC User Manual
Teac HD 35 X2PUK User Manual
Sony CDX R6750 User Manual
Seagate ST3160022ACE User Manual
Seagate SAVVIO ST9450304SS User Manual
Samsung Spinpiont M7 M7 User Manual
Samsung 07202010 User Manual
Philips AJ 3250 User Manual
Oregon Clock RRM320P User Manual
Nokia Cell Phone E61 User Manual