Philips DVD Player DVD710 05 User Manual

INTRODUCTION  
CONTENTS  
CONTENTS  
INTRODUCTION ..................................................................P 5  
INSTALLATION ....................................................................P 7  
STANDARD CONNECTIONS................................................P 9  
GETTING STARTED..............................................................P 11  
PLAYING A DVD-VIDEO DISC..............................................P 12  
PLAYING A VIDEO CD..........................................................P 16  
PLAYING AN AUDIO CD ......................................................P 18  
SETTINGS ............................................................................P 20  
PARENTAL CONTROL ..........................................................P 22  
BEFORE REQUESTING SERVICE ..........................................P 23  
DVD-VIDEO  
THE ENTERTAINMENT MEDIUM FOR THE MILLENIUM  
DIGITAL VIDEO  
Video was never like this before! Perfect digital studio-quality  
pictures with truly 3-dimensional digital multichannel audio.  
Story sequences screened from your own choice of camera  
angle.  
Language barriers broken down by sound tracks in as many as  
eight languages, plus subtitles - if available on disc - in as  
many as 32. And whether you watch DVD-Video on wide-  
screen or regular TV, you always see it the way it was meant  
to be.  
DVD-Video uses state-of-the-art MPEG2 data compression  
technology to register an entire movie on a single 5-inch disc.  
DVDs variable bitrate compression, running at up to 9.8  
Mbits/second, captures even the most complex pictures in  
their original quality.  
The crystal-clear digital pictures have a horizontal resolution  
of over 500 lines, with 720 pixels (picture elements) to each  
line. This resolution is more than double that of VHS, superior  
to Laser Disc, and entirely comparable with digital masters  
made in recording studios.  
DVD-Video discs conform to either the PAL or NTSC video  
standard. This dual-standard player can play both types, and  
present them in the best possible way on your multistandard  
TV screen.  
As the universal video system of the future, DVD-Video offers  
optimal pictures on any TV screen.  
5
english  
 
INSTALLATION  
DVD710 DVD/VIDEO CD/CD PLAYER  
STOP  
PLAY  
REPEAT  
PREV  
NEXT  
SHUFFLE PAUSE  
A
REPEAT  
TITLE  
TITLE  
TOTAL REM  
TIME  
.
.
.
.
.
.
.
.
.
. . . . .  
10 11 12 13 14 15  
+
1
2
3
4
5
6
7
8
9
PAUSE  
OPEN/ CLOSE  
M
P E G  
Mult ichannel  
ON/ OFF  
1
2
3
4
5 6 7  
8
9 10  
FRONT OF PLAYER  
1
ON/OFF  
2
3
4
5
6
7
8
9
0
Disc tray  
Tray OPEN/CLOSE  
Display  
REPEAT/chapter/track/title/disc  
O PREVious title/chapter/track  
P NEXT title/chapter/track  
9 STOP  
; PAUSE/Still/Step  
2 PLAY  
20  
18  
16  
14  
12  
10  
8
6
4
2
21  
19  
17  
15  
13  
11  
9
7
5
3
1
1
2
3
4 5  
6
7
REAR OF PLAYER  
1
Power supply  
2
3
Digital audio output  
Audio R; Audio output R  
Audio L; Audio output L  
Video (CVBS); Video output  
4
5
6
7
CAUTION  
DC Power output (for optional external RF modulator)  
A/V Euroconnector  
Do not touch the inner pins of rear-panel connectors.  
Electrostatic discharge may cause permanent damage  
to the unit.  
NTSC/PAL switch (for player menus)  
7
english  
 
7
                                                                                                                                                                                                                               
                                                                                                                                                                                                                                 
                                                                                                                                                                                                                                       
                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                               
                                                                                                                                                                                                                                                     
                                                                                                                                                                                                                                                       
                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                                     
INSTALLATION  
1
2
3
4
5
6
DISPLAY  
SHUFFLE PAUSE SCAN A-B REPEAT CHAPTER TITLE TRACK  
TITLE CHAPTER TRACK  
1 Remote control active (flashing)  
2 FTS (Favourite Track Selection) active  
3 SHUFFLE active  
TOTAL REM TRACK TIME  
VCD  
.
.
.
.
.
.
.
.
.
.
. .  
. .  
7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
+
+
1
1
2
2
3
3
4
4
5
5
6
6
8
8
9
9
10 11 12 13 14 15  
4 PAUSE active  
10  
7
12  
11  
9
8
5 SCAN active  
6 A-B REPEAT/CHAPTER/TITLE/TRACK mode active  
7 Chapter or track calendar  
8 TOTAL/REMaining/TRACK TIME in hours, minutes and  
seconds  
9 (V)CD disc inserted  
0 DVD disc inserted  
! DVD CHAPTER or VCD/CD TRACK number  
@ DVD TITLE number  
REMOTE CONTROL  
1
2
+ j  
OSD ........(On-Screen Display) on/off  
OSD  
1
2
9
ANGLE ....select DVD camera angle  
ANGLE  
SUBTITLE  
AUDIO  
....  
SUBTITLE language selector or subtitle on/off  
AUDIO ............spoken language selector  
1
4
2
5
8
0
3
6
3 0-9....................numerical key pad  
3
4
5
4 T-C ..................title/chapter mode selector  
7
9
T-C  
RETURN  
5 MENU ............select DVD-defined menu  
8
OK....................acknowledge menu selection.  
MENU  
OK  
up/down/left/right cursor movement  
6 5 J ............previous chapter or track / search back  
K ............next chapter or track/ search forward  
6
2......................play  
; ......................pause or still frame /step frame  
..................slow motion (1/2, 1/4, 1/8 speed)  
9......................stop  
6
7
SETUP  
A-B REPEAT  
SHUFFLE  
SCAN  
7 SETUP ............select player settings menu (in stop mode  
only)  
REPEAT*/A-B REPEAT chapter, track, title, disc  
SHUFFLE/SCAN* shuffle or scan on/off  
8 RETURN..........go back to previous menu step  
9
..................standby  
* Press key for about 1 second  
8
english  
 
STANDARD CONNECTIONS  
GENERAL NOTE  
EXCELLENT A/V CONNECTION  
- Depending on your TV and other equipment, there are  
various ways you could connect the DVD-Video player.  
These are shown below.  
VIDEO AUDIO  
IN  
IN  
- Please refer to your TV, VCR, Stereo System and any other  
User Manual(s) as necessary to make the optimal connec-  
tions.  
TV  
2
1
1
6
1
4
1
2
1
0
8
2
2
1
1
9
1
7
1
5
1
3
1
1
9
7
5
3
1
VIDEO CABLE  
HIGHEST QUALITY A/V CONNECTION  
AUDIO CABLE  
Connection to a TV with a video (CVBS) socket.  
1 Connect the Video socket on the rear of the player to the  
corresponding socket on the TV using the cable supplied.  
TV  
2 Connect the audio Left and Right channel sockets on the  
rear of the player to the corresponding sockets on the TV  
using the cable supplied. Alternatively, you can use the  
same cable to connect the audio Left and Right sockets on  
the rear of the player to the corresponding sockets on your  
stereo system.  
0
1
8
1
6
1
1
2
1
0
8
6
4
2
1
1
9
1
7
1
5
1
3
1
7
5
3
1
A/V EUROCONNECTOR CABLE  
CAUTION  
Connection to a TV with an A/V Euroconnector socket.  
Do not connect the players audio output to the phono  
input of your stereo system.  
1 Connect the A/V Euroconnector on the rear of the player to  
the corresponding connector on the TV using the cable sup-  
plied.  
2 Optionally you can also connect the audio Left and Right  
channel sockets on the rear of the player to the correspon-  
ding sockets on your stereo system.  
NOTE  
- Do not connect your DVD-player via your VCR, because the  
video quality could be distorted by the copy protected sys-  
tem.  
9
english  
 
STANDARD CONNECTIONS  
MULTICHANNEL SOUND FOR HOME THEATRE  
DIGITAL AUDIO (STEREO) SOUND  
CONNECTION  
For this connection, which produces the highest possible ste-  
reo sound quality, you need an audio amplifier with digital  
input, and the digital output of the player must be activated  
(see Settings p. 20). Connect the players digital audio output  
to the corresponding input on the amplifier. In this case, do  
not use the players audio Left and Right outputs.  
DIGITAL AUDIO  
IN  
RECEIVER  
2
0
1
8
1
6
1
4
1
2
1
0
8
6
4
2
2
1
1
9
1
7
1
5
1
3
1
1
5
3
1
DIGITAL AUDIO  
CABLE  
NTSC/PAL SETTING  
Use the NTSC/PAL switch on the rear of the player to set the  
Video CD and player menu according to the standard used by  
your TV-set.  
For multichannel sound, your player provides both digital and  
analog audio outputs.  
NOTE  
DIGITAL (MPEG 2 MULTICHANNEL OR DOLBY  
DIGITAL™) MULTICHANNEL SOUND  
- The video output standard for video CD and DVD-Video discs  
most corresponds to the disc being played.  
1 For this, which provides the highest multichannel sound  
quality, you need a digital multichannel A/V receiver.  
CONNECTING THE POWER SUPPLY  
2 Connect the digital audio output on the rear of the player to  
a suitable input on the receiver using a digital audio cable  
(available as option). In this case, do not use the players  
audio Left and Right outputs.  
1 Plug the female end of the power cord supplied into the  
Power connector on the rear of the player.  
2 Plug the male end of the cord into an AC outlet.  
3 You will need to activate the digital output of the player  
(See Settings p. 20).  
NOTE  
- The player automatically adjust to the local AC voltage.  
4 The audio format of the digital output is dependent on the  
audio format of the selected audio stream. Make sure that  
the selected audio stream matches the capabilities of the  
receiver connected to the digital output.  
- When the player is in the “OFF” position, it still consumes  
some power. If you wish to disconnect your player comple-  
tely from the power supply, withdraw the plug from the AC  
Outlet.  
ANALOG (DOLBY PRO LOGIC™) MULTICHANNEL  
SOUND  
CAUTION  
1 If your TV set has a Dolby Pro Logic™ decoder, simply hook  
up the player to the TV using the A/V Euroconnector, or  
Video (CVBS) and audio connections as on p. 9.  
Only qualified service personnel should remove the  
cover or attempt to service this device.  
2 If not, make the A/V Euroconnector, or Video (CVBS) con-  
nection to the TV p. 9, and connect the players audio Left  
and Right outputs to suitable inputs on a Dolby Pro Logic™  
Audio/Video receiver, using the cable supplied.  
3 For speaker connections, follow the instructions given in  
the TV set or A/V receiver user manual.  
NOTE  
-
You cannot use the RF Modulator option for home theatre.  
- If the audio format of the digital output does not match the  
ceapanbilitiges olf yiousr rehceiver, the sound will be muted.  
10  
 
STANDARD CONNECTIONS  
GETTING STARTED  
OPERATION  
INFRARED REMOTE CONTROL  
LOADING THE BATTERIES  
NOTE  
- Unless otherwise mentioned, all operations can be carried  
out with the remote control. Always point the remote con-  
trol directly at the player, making sure there are no obstruc-  
tions in the path of the infrared beam.  
1 Open the battery compartment cover.  
2 Insert two 'AAA' (R03) batteries as indicated inside the  
battery compartment.  
- When there are corresponding keys on the front panel, they  
can also be used.  
3 Close the cover.  
CAUTION  
Do not mix old and new batteries. and NEVER mix dif-  
ferent types of batteries (standard, alkaline and so on).  
SWITCHING ON  
1 Switch on the TV and select the video input for your DVD-  
Video player.  
2 To enjoy sound through your stereo system, turn on the sys-  
tem and select the source input for the DVD-Video player.  
or  
To enjoy DVD-Video with multichannel (surround) sound,  
switch on the Home Theatre system and select the source  
input for your DVD-Video player.  
3 On the front of the DVD-Video player, press ON/OFF. The  
player display lights, and the OSD invites you to insert a  
disc.  
4 With Autoplay on (the factory setting) any disc already  
inserted in the player starts to play.  
Inse r t disc  
11  
english  
 
GETTING STARTED  
PLAYING A DVD-VIDEO DISC  
INSERTING A DISC  
PLAYING A DVD-VIDEO DISC  
You will recognize DVD-Video discs by the  
logo. Depending on the material on the disc  
(a movie, video clips, a drama series, etc.)  
it may have one or more Titles, and each  
Title may have one or more Chapters. Play stops at the end of  
each Title. To make access easy and convenient, your player  
lets you move between Titles, and also between Chapters.  
M
P
E
G
Mult ichannel  
DVD  
DVD-VIDEO DISC  
SH  
U
F
F
L
E
T
IT  
L
E
P
A
USE  
1
.
2
3
4
5
6
7
.
.
.
TITLE 1  
TITLE 2  
.
.
OPEN/ CLOSE  
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2  
CHAPTER 3  
1 Press OPEN/CLOSE on the front of the player. The disc tray  
opens.  
NOTE  
- During play, various icons will appear on the TV screen for  
about 2 seconds to confirm that a function has been selec-  
ted. You can get rid of these icons by pressing OSD.  
2 Lay your chosen disc in the tray, label side up. Make sure it  
is sitting properly in the correct recess.  
3 Gently push the tray, or press OPEN/CLOSE, to close the  
tray.  
- At any time during play, you can press OSD to call up the  
Play Banner, which shows you which functions are active,  
for about 2 seconds. To keep the Play Banner on the screen,  
hold down OSD for a couple of seconds. To get rid of the  
Play Banner, press OSD again.  
- With Autoplay on (the factory setting) play starts.  
- With Autoplay off, the (play) screen for the type of disc  
inserted appears on the OSD, and information about the  
discs contents and total playing time appear on the  
display.  
- List of icons:  
- To turn Autoplay off or on, see Settings (p. 20).  
........................................Play  
........................................Pause  
........................................Stop  
NOTE  
- Since it is usual for DVD movies to be released at different  
times in different regions of the world, all players have  
region codes, and discs can have an optional region code. If  
you insert a disc of a different region code to your player,  
you will see the region code notice on the screen. The disc  
will not play, and should be removed.  
........................................A-B repeat  
A - B  
............................Search forward  
............................Search backward  
1/4  
1/8  
................Slow forward  
1/2  
........................................Repeat disc  
........................................Repeat title  
........................................Repeat chapter  
........................................Chapter shuffle  
........................................Title indication  
T
C
chapter  
shuffle  
TITLE  
02  
........................................Chapter indication  
........................................Disable function  
........................................Angle  
CHAPT  
004  
3
1
7
1
........................................No alternative angle  
........................................Subtitle language  
no  
12  
english  
 
PLAYING A DVD-VIDEO DISC  
........................................Audio language  
........................................Audio system  
........................................Remaining time of title  
........................................Elapsed time  
NOTE  
AUDIO  
ENG  
- If the number has more than one digit, press the keys in  
rapid succession.  
MPEG  
2 ch  
- For more information about chapters, see “Checking the  
contents of DVD-Video discs: Menus” p. 15.  
7:24:59  
7:59  
MOVING TO ANOTHER TITLE  
........................................Resume  
........................................Total time  
When a disc has more than one title (which you can see from  
both the OSD and the player display if you press 9), you can  
move to another title as follows:  
2:48:59  
PLAYING A TITLE  
Press T-C, then press K briefly during play to step forward  
to the next title.  
With Autoplay on, play starts when you close the disc dra-  
wer.  
Press T-C, then press J briefly during play to return to the  
beginning of the current title. Press J briefly again to step  
back to the beginning of the previous title.  
With Autoplay off, press 2.  
NOTE  
To go directly to any title, press T-C, then enter the title  
number using the numerical keys.  
- Some DVD-Video discs carry their own Autoplay, in which  
case play always starts automatically.  
The disc may invite you to select an item from a menu. If  
the selections are numbered, press the appropriate numeri-  
NOTE  
- If the number has more than one digit, press the keys in  
rapid succession.  
cal key; if not, use  
and press OK.  
to highlight your selection,  
As the disc plays, the player display shows the current  
- For more information about titles, see “Checking the con-  
tents of DVD-Video discs: Menus” p. 15.  
title and chapter, and the elapsed playing time.  
Play will stop at the end of a Title and this can result in  
return to menu. To go on to the next Title, press 2.  
PARENTAL CONTROL  
To stop play at any other time, press 9.  
DVD vide o  
You can resume play from the point at which you stopped.  
Press 2 twice.  
Pa r e nt a l C o nt r o l is a ct ive .  
P le a se e nt e r yo ur P IN  
t o play t his disc  
The RESUME feature applies, not only to the disc in the  
player, but also to the last four discs you have played.  
Simply re-insert the disc, press 2 if Autoplay is off, and  
when you see the Resume icon on the screen,  
press 2 again.  
1 e je ct disc 2  
MOVING TO ANOTHER CHAPTER  
If you activate Parental Control, only discs that you have  
already authorised as suitable for all ages can be played as  
above.  
When a title on a disc has more than one chapter (which you  
can see from the player display), you can move to another  
chapter as follows:  
To play any other DVD-Video disc, the OSD will ask you to  
enter your Parental Control PIN code. When this has been  
done, play starts automatically.  
Press K briefly during play to step forward to the next chap-  
ter.  
To activate Parental Control, and to authorize discs, see  
Activating Parental Control (p. 22).  
Press J briefly during play to return to the beginning of the  
current chapter. Press J briefly again to step back to the  
beginning of the previous chapter.  
To go directly to any chapter, enter the chapter number  
using the numerical keys.  
13  
english  
 
PLAYING A DVD-VIDEO DISC  
NOTE  
To return to normal play, press SHUFFLE briefly.  
- If you forget your PIN code, you can erase it when the code  
is requested as above, by pressing 9 four times. Parental  
Control will then be de-activated. To re-activate it, see  
Activating Parental Control (p. 22).  
REPEAT CHAPTER/TITLE/DISC  
To repeat the currently playing chapter, press REPEAT for  
about 1 second:  
STILL PICTURE AND STEP FRAME  
REPEAT CHAPTER appears on the player display.  
To get a still picture, press ; during play.  
To step forward to the next picture frame, press ; again.  
To return to play, press 2.  
To repeat the currenty playing title, press REPEAT a second  
time for about 1 second:  
REPEAT TITLE appears on the display.  
To repeat the entire disc, press REPEAT a third time for  
about 1 second;  
SEARCH  
REPEAT appears on the display.  
To exit Repeat mode, press REPEAT a fourth time for about  
1 second.  
To search forwards or backwards through the disc at 4x  
normal speed, press K or J for about 1 second during play.  
Search begins, and sound is muted.  
A-B REPEAT  
To step up to 32x normal speed, press K or J again.  
To repeat or loop a sequence in a title:  
To go directly to 32x normal speed, hold down K or J until  
the  
or  
icon appears.  
Press A-B REPEAT briefly at your chosen starting point;  
A appears on the player display.  
To return to 4x normal speed, press K or J again.  
Search speed and direction are indicated on the screen  
Press A-B REPEAT briefly again at your chosen end point;  
for 2 seconds each time K or J is pressed.  
A-B appears on the display, and the repeat sequence  
begins.  
To end the search, press 2, ;,  
, or 9 as desired.  
To exit the sequence, press A-B REPEAT briefly again.  
CAMERA ANGLE  
SLOW MOTION  
Press  
muted.  
to play video at 1/2 normal speed with sound  
If the disc contains sequences recorded from different  
camera angles, the angle icon appears  
showing the number of available angles, and  
the angle being shown. You can then change the camera  
angle if you wish.  
,
Press  
Press  
Press  
again to play at 1/4 normal speed.  
again to play at 1/8 normal speed.  
again to play video at 1/2 normal speed  
3
7
To get another angle, press ANGLE  
.
Play speed is indicated on the screen for 2 seconds each  
time the button is pressed.  
The angle icon will show the next angle.  
To go to any angle directly, enter the angle number using  
the numerical keys (0-9).  
To exit slow motion mode, press 2, ;, 5/6 or 9 as desi-  
red.  
NOTE  
SHUFFLE  
- The angle icon remains on the screen unless you turn off the  
angle feature.  
This shuffles the playing order of chapters within a title, if the  
title has more than one.  
+
To turn off the angle feature, press OSD  
:
the angle icon disappears.  
Press SHUFFLE briefly during play.  
chapter  
appears on the screen for about 2 seconds.  
shuffle  
To turn the angle feature on again, press angle  
again:  
the angle icon reappears.  
As each chapter is played, its number disappears from the  
track calendar.  
14  
english  
 
PLAYING A DVD-VIDEO DISC  
CHANGING THE AUDIO LANGUAGE AND CHANNEL  
CONFIGURATION  
Press T-C followed by MENU.  
If the disc has a title menu, this now appears on the  
OSD.  
This changes the language and the audio channel configura-  
tion when alternatives are available on the disc.  
To remove the title menu, press T-C again.  
Press AUDIO during play.  
AUDIO  
ENG  
The audio language and channel configura-  
tion icons appear on the screen  
MPEG  
2 ch  
for 2 seconds.  
Press AUDIO repeatedly to step through the options.  
At each step, the language changes. If the sound confi-  
guration changes too (for example from multichannel to  
stereo) this is also indicated.  
SUBTITLES  
When subtitles are available on a disc, you can turn them  
....  
on by holding SUBTITLE  
subtitles appear.  
down during play until the  
....  
To step through the language options, press SUBTITLE  
repeatedly.  
....  
To turn the subtitles off, hold SUBTITLE  
down again.  
SCAN  
Plays the first 10 seconds of each title on the disc.  
Press SCAN for about 1 second.  
To continue play at your chosen title, press SCAN again for  
about 1 second or press 2.  
CHECKING THE CONTENTS OF DVD-VIDEO DISCS:  
MENUS  
For titles and chapters, selection menus may be included on  
the disc. The DVDs players menu feature allows you to make  
selections from these menus. Press the appropriate numerical  
key; or use the  
and press OK.  
keys to highlight your selection,  
Press MENU.  
If the present title has a “root” menu, this now appears  
on the OSD.  
The “root” menu can list camera angles, spoken language  
and subtitle language options, and chapters for the title.  
To exit the “root” menu, press MENU again.  
15  
english  
 
PLAYING A VIDEO CD  
PLAYING A DISC  
PLAYING A VIDEO CD  
With Autoplay on, play starts when you close the disc dra-  
wer.  
You will recognize Video CDs by the logo.  
Depending on the material on the disc (a  
movie, video clips, a drama series, etc.) it  
may have one or more tracks, and tracks  
may have one or more indexes, as indica-  
ted on the disc case. To make access easy and convenient,  
your player lets you move between tracks, and between  
indexes.  
With Autoplay off, press 2.  
As the disc plays, the display shows the current track, and  
the elapsed playing time.  
Play will stop at the end of the disc.  
To stop play at any other time, press 9.  
Some Video CDs have Playback Control (PBC), which is a pre-  
defined playback sequence stored on the disc.  
You can resume play from the point at which you stopped.  
Press 2 twice.  
NOTE  
- During play, various icons will appear on the TV screen for  
about 2 seconds to confirm that a function has been selec-  
ted. You can get rid of these icons by pressing OSD.  
The RESUME feature applies, not only to the disc in the  
player, but also to the last four discs you have played.  
Simply re-insert the disc, press 2 if Autoplay is off, and  
when you see the Resume icon on the screen  
, press  
2 again.  
- At any time during play, you can press OSD to call up the  
Play Banner, which shows you which functions are active,  
for about 2 seconds. To keep the Play Banner on the screen,  
hold down OSD for a couple of seconds. To get rid of the  
Play Banner, press OSD again.  
MOVING TO ANOTHER TRACK  
When a disc has more than one track (which you can see  
from both the OSD and the player display if you press 9), you  
can move to another track as follows:  
- List of icons:  
........................................Play  
........................................Pause  
........................................Stop  
Press T-C, then press K briefly during play to step forward  
to the next track.  
Press T-C, then press J briefly during play to return to the  
beginning of the current track. Press J briefly again to step  
back to the beginning of the previous track.  
........................................A-B repeat  
A - B  
............................Search forward  
............................Search backward  
To go directly to any track, press T-C, then enter the track  
number using the numerical keys.  
1/8  
................Slow forward  
1/4  
1/2  
........................................Repeat disc  
........................................Repeat track  
........................................Shuffle  
NOTE  
1
- If the number has more than one digit, press the keys in  
rapid succession.  
s h u ffle  
........................................Track indication  
TRACK  
02  
MOVING TO ANOTHER INDEX  
........................................Index indication  
........................................Remaining time of title  
........................................Elapsed time  
........................................Total time  
INDEX  
004  
When a track has more than one index (as indicated on the  
disc case), you can move to another index as follows:  
7:24:59  
7:59  
Press K briefly during play to step forward to the next  
index.  
2:48:59  
Press J briefly during play to return to the beginning of the  
current index. Press J briefly again to step back to the  
beginning of the previous index.  
To go directly to any index enter the index number using the  
numerical keys.  
16  
english  
 
PLAYING A VIDEO CD  
NOTE  
SEARCH  
- If the number has more than one digit, press the keys in  
rapid succession.  
To search forwards or backwards through the disc at 4x  
normal speed, press K or J for about 1 second during  
play.  
PLAYBACK CONTROL (PBC)  
Search begins, and sound is muted.  
Insert a Video CD with PBC and press 2.  
To step up to 32x normal speed, press down K or J again.  
The PBC menu appears on the TV screen.  
To go directly to 32x normal speed, hold down K or J until  
Go through the menu with the keys indicated on the TV  
screen until your chosen passage starts to play. If a PBC  
menu consists of a list of titles, you can select a title  
directly.  
the  
or  
icon appears.  
To return to 4x normal speed, press down K or J again.  
Search speed and direction are indicated on the screen  
for 2 seconds each time K or J is pressed.  
Enter your choice with the J, K or numerical keys.  
Press 2 to start play of the selected title.  
To end the search, press 2, ;,  
or 9 as desired.  
Press RETURN to go back to the previous menu.  
SLOW MOTION  
PARENTAL CONTROL  
Press  
muted.  
to play video at 1/2 normal speed with sound  
Press  
Press  
again to play at 1/4 normal speed.  
again to play at 1/8 normal speed.  
vide o C D  
Pa r e nt a l C o nt r o l is a ct ive .  
P le a se e nt e r yo ur P IN  
t o play t his disc  
Press  
again to play video at 1/2 normal speed.  
Play speed is indicated on the screen for 2 seconds each  
time the button is pressed.  
1 e je ct disc 2  
To exit slow motion mode, press 2, ;, 5/6 or 9 as desi-  
red.  
If you activate Parental Control, only discs that you have  
already authorised as suitable for all ages can be played as  
above.  
SHUFFLE  
To play any other Video CD, the OSD will ask you to enter  
your Parental Control PIN Code. When this has been done,  
play starts automatically.  
This shuffles the playing order of the tracks, if the disc has  
more than one.  
Press SHUFFLE briefly during play.  
To activate Parental Control, and to authorize discs, see  
Activating Parental Control (p. 22).  
appears on the screen for about 2 seconds.  
s h u ffle  
As each track is played, its number disappears from the  
track calendar.  
NOTE  
- If you forget your PIN code, you can erase it when the code  
is requested as above, by pressing 9 four times. Parental  
Control will then be de-activated. To re-activate it, see  
Activating Parental Control (p. 22).  
To return to normal play, press SHUFFLE briefly.  
REPEAT TRACK/DISC  
To repeat the currently playing track, press REPEAT for  
about 1 second:  
STILL PICTURE AND STEP FRAME  
REPEAT TRACK appears on the player display.  
To get a still picture, press ; during play.  
To step forward to the next picture frame, press ; again.  
To return to play, press 2.  
To repeat the entire disc, press REPEAT a second time for  
about 1 second;  
REPEAT appears on the display.  
17  
english  
 
PLAYING A VIDEO CD  
PLAYING AN AUDIO CD  
To exit Repeat mode, press REPEAT a third time for about 1  
second.  
PAUSE  
Press ; during play.  
A-B REPEAT  
To return to play, press 2.  
To repeat or loop a sequence:  
SEARCH  
Press A-B REPEAT briefly at your chosen starting point;  
A appears on the player display.  
To search forwards or backwards through the disc at 4x  
normal speed, press K or J for about 1 second during  
play.  
Press A-B REPEAT briefly again at your chosen end point;  
A-B appears on the display, and the repeat sequence  
Search begins, and sound is partially muted.  
begins.  
To step up to 8x normal speed, press K or J again.  
To exit the sequence, press A-B REPEAT briefly again.  
Search goes to 8x speed, and the sound is muted.  
SCAN  
To go directly to 8x normal speed, hold down K or J until  
the  
or  
icon appears.  
Plays the first 10 seconds of each title on the disc.  
Press SCAN for about 1 second.  
To return to 4x normal speed, press K or J again.  
If the TV is on, search speed and direction are indicated on  
the screen each time K or J is pressed.  
To continue play at your chosen title, press SCAN again for  
about 1 second or press 2.  
To end the search, press 2, ; or 9 as desired.  
PLAYING AN AUDIO CD  
MOVING TO ANOTHER TRACK  
Audio CDs contain music tracks only.  
You will recognize CDs by their logo.  
Press K briefly during play to step forward to the next track.  
Press J briefly during play to return to the beginning of the  
current track. Press J briefly again to step back to the  
beginning of the previous track.  
You can play audio CDs using the OSD or,  
through a stereo system only, using keys on  
the remote control and/or front panel.  
To go directly to any track, enter the track number using the  
numerical keys.  
PLAYING A DISC  
With Autoplay on, play starts when you close the disc  
drawer.  
NOTE  
- If the number has more than one digit, press the keys in  
rapid succession.  
With Autoplay off, press 2.  
The disc starts to play; if the TV is on, the CD Play scre-  
SHUFFLE  
en appears on the OSD.  
Press SHUFFLE briefly during play.  
a udio C D  
The order of the tracks is changed.  
tim e  
4
tracks  
12  
As each track is played, its number disappears from the  
player display.  
69:16  
1
2
3
5
6
7
8
9
10 11 12  
To return to normal play, press SHUFFLE briefly again.  
7:24  
4:19  
REPEAT TRACK/DISC  
To repeat the current-playing track, press REPEAT for about  
1 second:  
Play will stop at the end of the disc.  
To stop play at any other time, press 9.  
english  
REPEAT TRACK appears on the display.  
18  
 
PLAYING AN AUDIO CD  
To repeat the entire disc, press REPEAT a second time for  
about 1 second;  
FTS (FAVOURITE TRACK SELECTION)  
REPEAT appears on the display.  
NOTE  
- FTS Favourite Track Selections are compiled and played  
using the OSD: ensure that the TV is on.  
To exit Repeat mode, press REPEAT a third time for about 1  
second.  
Playing an FTS program  
A-B REPEAT  
If Auto FTS is set to on, play of the FTS program starts imme-  
diately. If Auto FTS is off:  
To repeat or loop a sequence:  
1 Insert a disc and go to Stop mode.  
Press A-B REPEAT briefly at your chosen starting point;  
A appears on the player display.  
2 Press or to start compiling FTS programs.  
3 If available the excisting FTS program appears  
Press A-B REPEAT briefly again at your chosen end point;  
A-B appears on the display, and the repeat sequence  
4 Follow instructions under “To exclude tracks” or “To select  
tracks”.  
begins.  
To exit the sequence, press A-B REPEAT briefly again.  
To turn Auto FTS on and off, see Settings, p. 20  
SCAN  
Compiling an FTS program  
FTS programs can be compiled by selecting the tracks you  
want to play (“Track Selection”) or by excluding the tracks you  
don’t want to play (“Excluding Tracks”)  
Plays the first 10 seconds of each title on the disc.  
Press SCAN for about 1 second.  
To exclude Tracks:  
To continue play at your chosen title, press SCAN again for  
1 Insert a disc and go to Stop mode.  
about 1 second or press 2.  
2 Press  
3 Use or to move to the first track number you want to  
exclude.  
4 Press  
.
5 Repeat steps 3 and 4 to exclude further track numbers in  
the same way. If you change your mind, you can re-include  
any track number by moving back to it and pressing  
6 To clear your whole selection and start again, press 9.  
a udio C D  
e xclude t r a cks  
1
2
3
4
5
6
7
7
8
9
10 11 12 13 14  
2
play  
e xclude  
pla y select ion clea r select ion  
9
2
19  
english  
 
PLAYING AN AUDIO CD  
SETTINGS  
To select Tracks:  
SETTINGS  
1 Insert a disc and go to Stop mode.  
In the settings menu, you can customize your player to suit  
your own particular requirements.  
2 Press  
.
3 Use or to move to the first track number you want to  
In Stop mode:  
select.  
4 Press  
.
Press SETUP to obtain the Settings screen.  
5 Repeat steps 3 and 4 to select further track numbers in the  
same way. If you change your mind, you can de-select track  
numbers in reverse order by pressing as required.  
vide o C D  
se t t ings  
a udio  
subt it le  
english  
english  
Not Act ive  
16:9  
6 To clear your whole selection and start again, press 9.  
pa r e nt a l co nt r o l  
T V shape  
a udio C D  
favo ur it e t r a cks  
a ut o play  
on  
on  
a ut o FT S  
3
1
10  
2
6
3
11  
4
5
5
favo ur it e  
Move to the function you want to change using  
use to scroll to your preferred option.  
then  
6
7
8
9
10 11 12 13 14  
2
disc  
pla y select ion  
clea r select ion  
9
2
se t t ings  
vide o C D  
a ll  
digit a l o ut put  
vide o shift  
-
+
When your FTS program is complete, press 2 to start play, or  
RETURN to go back to Stop mode. In either case, the FTS pro-  
gram will be automatically memorized.  
english  
on  
O SD la nguage  
3D so und  
NOTE  
- You can have a total of at least 100 FTS programmed discs.  
If you exceed that number, the least frequently played FTS  
program(s) are automatically deleted.  
To exit Settings menu, press RETURN or SETUP.  
Audio  
The sound will be in the language you choose provided this is  
available on the disc in play. If not, speech will revert to the  
first spoken language on the disc.  
Subt it le  
The subtitles will be in the language you choose provided this  
is available on the disc in play. If not, subtitles will revert to  
the first subtitle language on the disc.  
Pa r e nt a l C o nt r o l  
Parental Control is described separately under ‘Parental  
Control’ p. 22.  
20  
english  
 
SETTINGS  
T V Shape  
Vide o Shift  
Factory setting 16:9 (wide screen). If you have a regular (4:3)  
TV, you can choose Letterbox for a ‘wide-screen’ picture with  
black bars top and bottom, or Pan Scan, for a full-height pictu-  
re with the sides trimmed. If a disc has Pan Scan, the picture  
then moves (scans) horizontally to keep the main action on  
the screen.  
Factory setting centers the video on your TV screen. Use this  
setting to personalize the position of the  
picture on your TV by scrolling it to the left or right.  
O SD La nguage  
The players on-screen display will be in the language you  
choose.  
3D So und  
To enjoy multichannel sound even on two speakers, turn  
3D Sound on.  
Aut o P lay  
Factory setting ON means that discs starts to play automati-  
cally when inserted. Set to OFF if you prefer to start play  
manually.  
Aut o FT S  
Factory setting ON means that when a disc with an FTS pro-  
gram (see ‘Compiling an FTS program p. 19) is inserted, the  
FTS program automatically starts to play. Set to Off if you pre-  
fer to control FTS play manually.  
Digit a l O ut put  
Factory setting OFF means that there is no audio signal at the  
digital output. If you are connecting equipment with a digital  
input, change the setting to ALL.  
If your equipment doesn't include a digital decoder, (e.g. digi-  
tal speakers) set the digital output to PCM.  
21  
english  
 
                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                        
is this  
disc authorized?  
PARENTAL CONTROL  
PARENTAL CONTROL  
ACTIVATING PARENTAL CONTROL  
when Parental Control is active  
This can only be done in Stop mode  
1 Press SETUP to obtain the Settings menu.  
insert disc  
2 Move to Parental Control using  
.
open tray  
NOT OK  
enter pin  
OK  
3 Press or to change Parental Control to Active.  
NO  
TRY 3X  
4 You will be asked to enter a 4-digit pin code of your own  
choice, and then to confirm your choice.  
YES  
YES  
5 This code must then be entered to play any DVD-Video or  
Video CD disc, unless you have previously authorized the  
disc as suitable for all ages.  
normal operation  
PRESS "STOP"  
6 To de-activate Parental Control repeat the above procedure.  
DVD vide o  
t it le s  
AUTHORIZING DISCS  
t im e  
09:16  
45  
1
2
3
4
5
6
7
8
9
10 11 12 13  
1 Insert the disc you wish to authorize and close the tray.  
e je ct disc  
1
2
pa r e nt a l co nt r o l  
The OSD will ask for your pin code.  
2 Enter your pin code.  
3 Press 9.  
select  
Parental Control  
change  
autorization  
4 Select Parental Control on the OSD by pressing  
Enter Pin Code  
ENTER  
PIN CODE  
The OSD will ask for your pin code.  
5 The disc is now authorized, and will play in the normal way,  
DVD vide o  
without the pin code.  
This disc is not authorised  
to BE VIEW ED without PIN.  
Please enter your PIN  
OK  
NOT  
OK  
to authoeise viewing  
To cancel your authorization, repeat steps 4 and 5.  
1
ba ck  
2
NOTE  
- You can have a total of 50 authorized discs. If you exceed  
that number, the least frequently played disc(s) are automa-  
tically de-authorized.  
22  
english  
 
BEFORE REQUESTING SERVICE  
NO RETURN TO START-UP SCREEN WHEN DISC IS  
REMOVED..................................................................................  
BEFORE REQUESTING SERVICE  
Reset by switching the player off, then on  
again.  
Check to see if the program requires  
another disc to be loaded.  
If it appears that the DVD-Video player is faulty, first consult  
this checklist. It may be that something simple has been over-  
looked. Under no circumstances attempt to repair the system  
yourself; this will invalidate the warranty.  
THE PLAYER DOES NOT RESPOND TO THE REMOTE  
Look for the specific symptom(s). Then perform only the  
actions listed to remedy the specific symptom(s).  
CONTROL ..................................................................................  
Aim the remote control directly at the sen-  
sor on the front of the player.  
Avoid all obstacles which may interfere  
with the signal path.  
SYMPTOM  
Remedy  
Inspect or replace the batteries.  
NO POWER................................................................................  
DISTORTED OR BLACK AND WHITE PICTURE WITH DVD  
OR VIDEO CD DISC..................................................................  
Check if the on/off button on the front of  
the player is set to on.  
The disc format is not according to the TV-  
set used (NTSC/PAL).  
Check if both plugs of the mains cord are  
properly connected.  
Check if there is power at the AC outlet by  
plugging in another appliance.  
NO AUDIO AT DIGITAL OUTPUT ..........................................  
Check the digital connections.  
Check the settings menu to make sure that  
the digital output is set to on.  
Check if the audio format of the selected  
audio language matches your receiver  
capabilities.  
NO PICTURE..............................................................................  
Check if the TV is switched on.  
• Select the same channel and source on the  
TV as on the player.  
Check the video connection.  
BUTTONS DO NOT WORK......................................................  
DISTORTED PICTURE..............................................................  
Reset by switching the player off, then on  
again.  
Check the disc for fingerprints and clean  
with a soft cloth, wiping from centre to  
edge.  
• Sometimes a small amount of picture  
distortion may appear.This is not a  
malfunction.  
CLEANING DISCS  
COMPLETELY DISTORTED PICTURE WITH PLAYER MENU  
Some problems occur because the  
disc inside the player is dirty. To avoid  
such problems clean your discs regu-  
larly with a soft cloth. Wipe the disc  
from the center out.  
NTSC/PAL switch in wrong position.  
NO COLOUR IN PICTURE WITH PLAYER MENU................  
NTSC/PAL switch in wrong position.  
DISC CAN’T BE PLAYED ........................................................  
Ensure the disc label is upwards.  
Clean the disc.  
CAUTION  
Do not use solvents such as  
Check if the disc is defective by trying  
another disc.  
benzine, thinner, commercially  
available cleaners, or anti-static  
spray intended for analog discs.  
NO SOUND................................................................................  
Check audio connections.  
If using a HiFi amplifier, try another sound  
source.  
DISTORTED SOUND FROM HIFI AMPLIFIER ......................  
Check that the players audio L/R output is  
not connected to the amplifiers phono  
input.  
23  
english  
 
BEFORE REQUESTING SERVICE  
DIAGNOSTIC PROGRAM  
If the fault persists, you can run the Diagnostic Program in the  
player.  
INSTRUCTIONS:  
1 Switch the player off.  
2 Hold both OPEN/CLOSE and ; pressed and switch on the  
player.  
BUSY’ appears on the display together with a counter.  
The counter indicates the termination of the test when it  
reaches zero.  
After a few minutes, ‘BUSY’ changes to ‘ERROR’ or ‘PASS.  
3 Swith off the player to exit the Diagnostic Program.  
4 ERROR’ indicates that your player needs repair. Contact your  
dealer or the Philips Consumer Information Center (CIC).  
5 PASS’ indicates that the Diagnostic Program has found no  
fault. In this case, the malfunction may be due to misinter-  
pretation of the operating intructions, or an unsuitable disc,  
or incorrect connections. If you still cannot solve the pro-  
blem, contact your dealer or the Philips CIC.  
6 You will find the phone number of the Philips CIC in your  
Warranty Booklet.  
24  
english  
 

Petsafe Pet Fence In Ground Fence Kit User Manual
Philips Carrying Case SJA7180 User Manual
Philips Cooktop SBC MC600 User Manual
Philips Electric Shaver 4412 User Manual
Philips Stereo System FW C150 User Manual
Phoenix Gold Car Amplifier TI15001 User Manual
Pioneer Speaker System S F52 QL User Manual
Pioneer Stereo Receiver SX 9000 User Manual
Porter Cable Paint Sprayer PSH2 User Manual
Powermate Portable Generator PC049650318 User Manual