Pelco Stereo System c1978m User Manual

®
NET101RK  
19-Inch PelcoNet™  
Rack Mount Kit  
Installation/  
Operation Manual  
C1978M (11/01)  
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150  
International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120  
 
DESCRIPTION  
The NET101RK lets you mount several PelcoNetsystems in one location. The 19-inch  
rack mount kit has the following features:  
Installation of up to eight PelcoNet systems  
Simple integration of PelcoNet systems into existing 19-inch racks  
Central plug-in power supply for all PelcoNet systems  
Installation of PelcoNet transmitters and receivers in one rack mount kit  
APPLICATIONS  
RECEIVER  
LAN  
OR  
MONITOR  
WAN  
WEB BROWSER OR A VIDEO  
CONFERENCING SYSTEM  
Figure 1. PelcoNet Applications  
INSTALLATION  
The NET101RK contains the following parts:  
Mounting kit for 19-inch rack  
Power cord  
Figure 2. Connecting Electrical Power and Securing PelcoNet  
1. Remove the feet from the PelcoNet unit.  
2. Remove the nut and lock washer from the BNC connector on the PelcoNet unit.  
3. Slide the PelcoNet unit through a bay at the back of the NET101RK. The PelcoNet’s  
BNC connector should rest in the rounded cutout on the front of the NET101RK.  
4. Refer to Figure 2. Plug the small electrical connector on the NET101RK into the top  
receptacle marked “Power” on the back of the PelcoNet unit.  
5. Refer to Figure 2. Slip the lock washer removed in step 2 onto the BNC connector. In-  
stall the nut on the BNC connector and tighten.  
6. Repeat steps 1-5 for each PelcoNet unit to be installed.  
Pelco Manual C1978M (11/01)  
3
 
7. Install the NET101RK in the rack and attach using appropriate hardware (not in-  
cluded).  
8. Make all other hookups to the PelcoNet units. (Refer to the PelcoNet Installation/  
Operation manual for hookup instructions.)  
9. Insert the included power cord into the back of the NET101RK. Plug the power cord  
into an electrical outlet to apply power.  
SPECIFICATIONS  
Power Supply  
USA:  
Europe:  
90-132 VAC, 57-63 Hz  
180-264 VAC, 47-53 Hz  
60W  
Power Consumption:  
Operating Temperature: 41-104°F (5-40°C) ambient temperature  
Operating Humidity:  
Housing Dimensions:  
Weight:  
20-80% atmospheric humidity (non-condensing)  
18.8 (L) x 4.9 (D) x 5.2 (H) inches (47.8 x 12.5 x 13.3 cm)  
Approximately 6.6 pounds (3 kg)  
Standards:  
EN 55022, EN 55024, EN 60950  
(Design and product specifications subject to change without notice.)  
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If  
a
warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
1. Model and serial number  
Exceptions to this warranty are as noted below:  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product  
when returned.  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,  
which have a five-year warranty.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series  
fixed dome products.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned  
for credit, and RA number if returned for repair).  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are  
instructed to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelcos liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product  
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for  
such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused,  
whether by the negligence of Pelco or otherwise.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
REVISION HISTORY  
Manual # Date  
C1978M 11/01  
Comments  
Original version.  
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
©Copyright 2001, Pelco  
All rights reserved.  
4
Pelco Manual C1978M (11/01)  
 

Philips Cell Phone 655 User Manual
Philips DVR TL24A5T User Manual
Philips Stereo Amplifier TDA2616 User Manual
Philips Universal Remote SRU6008 User Manual
Pioneer Car Stereo System DEH 434R User Manual
Pioneer Computer Drive DVD 302 User Manual
Polaroid DVD Player DVP 300 User Manual
Polk Audio Speaker Sat30 User Manual
Poulan Pole Saw 545146928 User Manual
ProForm Treadmill PFTL999080 User Manual